Chapter 4 – Linear models – anything goes – Exercise solutions and Code Boxes

David Warton

2024-07-03

Exercise 4.1: Ravens and gunshots

We assume:

 library(ecostats)
 data(ravens)
 qqenvelope(ravens$delta[ravens$treatment==1])
plot of chunk ex4.1ravenscheck
plot of chunk ex4.1ravenscheck

This looks OK, there is no evidence against normality here

Code Box 4.1: Paired t-test for the ravens data

 data(ravens)
 crowGun = ravens[ravens$treatment == 1,]
 t.test(crowGun$Before, crowGun$After, paired=TRUE, alternative="less")
#> 
#>  Paired t-test
#> 
#> data:  crowGun$Before and crowGun$After
#> t = -2.6, df = 11, p-value = 0.01235
#> alternative hypothesis: true mean difference is less than 0
#> 95 percent confidence interval:
#>       -Inf -0.335048
#> sample estimates:
#> mean difference 
#>       -1.083333

There is some evidence that ravens fly towards the sound of gunshots.

Exercise 4.2: Ravens, guns and air horns

Is there evidence that the response to gunshot different to response to other treatments?

We will use a linear model, with location included as a blocking factor to control for differences in raven abundance from one place to another, see Code Box 4.3.

Code Box 4.2: Paired t-test for the ravens data via a linear model

 library(reshape2)
 crowLong = melt(crowGun,measure.vars = c("Before","After"),
                 variable.name="time",value.name="ravens")
 head(crowLong)
#>   delta    site treatment trees   time ravens
#> 1     2 pilgrim         1     1 Before      0
#> 2     1 pacific         1     1 Before      0
#> 3     4 uhl hil         1     1 Before      0
#> 4     1 wolff r         1     1 Before      0
#> 5     0 teton p         1     1 Before      0
#> 6     3 glacier         1     1 Before      2
 ravenlm = lm(ravens~site+time,data=crowLong)
 anova(ravenlm)
#> Analysis of Variance Table
#> 
#> Response: ravens
#>           Df Sum Sq Mean Sq F value   Pr(>F)   
#> site      11 55.458  5.0417    4.84 0.007294 **
#> time       1  7.042  7.0417    6.76 0.024694 * 
#> Residuals 11 11.458  1.0417                    
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Code Box 4.3: A linear model for the blocked design given by the raven counts in Exercise 4.2

To analyse, we first subset to the three treatments of interest (1=gunshot, 2=airhorn, 3=whistle):

crowAfter = ravens[ravens$treatment <=3,]
crowAfter$treatment = factor(crowAfter$treatment)
ft_crowAfter = lm(After~site+treatment,data=crowAfter)
anova(ft_crowAfter)
#> Analysis of Variance Table
#> 
#> Response: After
#>           Df Sum Sq Mean Sq F value Pr(>F)
#> site      11 28.667  2.6061  1.0118 0.4679
#> treatment  2 10.667  5.3333  2.0706 0.1500
#> Residuals 22 56.667  2.5758

To check assumptions we could look at diagnostic plots:

 par(mfrow=c(1,2),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
 plotenvelope(ft_crowAfter)
plot of chunk box4.3ravensblockassumptions
plot of chunk box4.3ravensblockassumptions

The residual vs fits plot has a fan-shaped pattern, suggesting that transformation might be a good idea here!

Exercise 4.3: Seaweed, snails and seaweed mass

Is there an effect of distance of isolation after controlling for wet mass?

Q’s – this is a hypothesis test, for an effect on Total of Dist after controlling for Wmass.

P’s We have three variables of interest:

We can get all three variables onto the same graph using a scatterplot, with different colours for different treatment levels, as in Code Box 4.4.

Code Box 4.4: Scatterplot of data from Exercise 4.3.

 data(seaweed)
 seaweed$Dist = factor(seaweed$Dist)
 plot(Total~Wmass, data=seaweed, col=Dist, 
      xlab="Wet Mass [log scale]",ylab="Density (per gram) [log scale]")
 legend("topright",levels(seaweed$Dist),col=1:3,pch=1)
plot of chunk box4.4seaweedplot
plot of chunk box4.4seaweedplot

Code Box 4.5: Analysis of covariance for the seaweed data of Exercise 4.3.

 seaweed$logTot = log(seaweed$Total)
 seaweed$logWmass = log(seaweed$Wmass)
 lmMassDist=lm(logTot~logWmass+Dist,data=seaweed)
  anova(lmMassDist)
#> Analysis of Variance Table
#> 
#> Response: logTot
#>           Df  Sum Sq Mean Sq F value    Pr(>F)    
#> logWmass   1  7.7216  7.7216 35.7165 1.975e-07 ***
#> Dist       2  2.1415  1.0708  4.9528   0.01067 *  
#> Residuals 53 11.4582  0.2162                      
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Exercise 4.4: Checking ANCOVA assumptions

Independence can be guaranteed by randomly allocating Dist treatments to plots.

Remaining assumptions can be checked using diagnostic plots.

par(mfrow=c(1,2),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
plotenvelope(lmMassDist, n.sim=99)
plot of chunk ex4.4seaweedplt
plot of chunk ex4.4seaweedplt

(Note that plotenvelope was run with just 99 iterations, to speed up computation time.)

Code Box 4.6: ANCOVA with the order of terms switched.

Notice that switching the order changes the results in the ANOVA table, and their interpretation.

 lmDistMass=lm(logTot~Dist+logWmass,data=seaweed)
 anova(lmDistMass)
#> Analysis of Variance Table
#> 
#> Response: logTot
#>           Df  Sum Sq Mean Sq F value    Pr(>F)    
#> Dist       2  4.8786  2.4393  11.283 8.273e-05 ***
#> logWmass   1  4.9845  4.9845  23.056 1.329e-05 ***
#> Residuals 53 11.4582  0.2162                      
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Exercise 4.5: Order of terms in writing out a model for snails and seaweed.

The correct model is ...logWmass+Dist so we can look for an effect of Dist after controlling for logWmass.

Code Box 4.7: “Type II sums of squares” for the ANCOVA of snails and seaweed.

drop1(lmMassDist,test="F")
#> Single term deletions
#> 
#> Model:
#> logTot ~ logWmass + Dist
#>          Df Sum of Sq    RSS     AIC F value    Pr(>F)    
#> <none>                11.458 -83.448                      
#> logWmass  1    4.9845 16.443 -64.861 23.0561 1.329e-05 ***
#> Dist      2    2.1415 13.600 -77.681  4.9528   0.01067 *  
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Exercise 4.6: Snails, isolation and time

Q’s – here is the research question: Does invertebrate density change with isolation? Does the isolation effect vary with time period?

We want to test a specific hypothesis (no effect of Dist, no interaction of Dist with Time).

P’s There are three variables involved in this research question:

Given previous information we could also add logWmass as another covariate…

Comparative boxplots would be a good way to start, as in Code Box 4.8.

Code Box 4.8: A comparative boxplot of snail density at each of the six possible combinations of sampling time and distance of isolation.

plot(Total ~ interaction(Dist,Time), data=seaweed, log="y") ## and as usual use xlabel, ylabel to name axes
plot of chunk box4.8seaweedcompBox
plot of chunk box4.8seaweedcompBox

Exercise 4.7: Factorial ANOVA assumptions

 par(mfrow=c(1,2),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
 ft_seaweedFact=lm(logTot~Time*Dist, data=seaweed)
 plotenvelope(ft_seaweedFact, n.sim=99)
plot of chunk ex4.7seaweedfact
plot of chunk ex4.7seaweedfact

(Note that plotenvelope was run with just 99 iterations, to speed up computation time.)

Code Box 4.9: Factorial ANOVA of Snails, Isolation, and Time

ft_seaweedFact = lm(logTot~Time*Dist,data=seaweed)
anova(ft_seaweedFact)
#> Analysis of Variance Table
#> 
#> Response: logTot
#>           Df  Sum Sq Mean Sq F value    Pr(>F)    
#> Time       1  0.2433 0.24333  0.8512 0.3605470    
#> Dist       2  5.0323 2.51613  8.8023 0.0005201 ***
#> Time:Dist  2  1.4673 0.73367  2.5666 0.0866804 .  
#> Residuals 51 14.5784 0.28585                      
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

There is marginal evidence of an interaction and strong evidence of a Dist main effect. So there is an effect of Dist and it could potentially vary with Time.

Note we used Time*Dist because Time is not the variable of primary interest, it is Dist, and we only include Time to control for sampling time effects

Code Box 4.10: R code for the interaction plot in Figure 4.1.

 library(dplyr)
 seaweed$Time = as.factor(seaweed$Time) 
 by_DistTime = group_by(seaweed,Dist,Time)
 distTimeMeans = summarise(by_DistTime, logTotal=mean(log(Total)))
 distTimeMeans
#> # A tibble: 6 × 3
#> # Groups:   Dist [3]
#>   Dist  Time  logTotal
#>   <fct> <fct>    <dbl>
#> 1 0     5         1.58
#> 2 0     10        1.31
#> 3 2     5         2.01
#> 4 2     10        2.36
#> 5 10    5         1.68
#> 6 10    10        2.13
 library(ggplot2)
 library(ggthemes) #loads special themes
 ggplot(seaweed, aes(x = factor(Dist), y = Total, colour = Time)) +
   geom_point() + geom_line(data = distTimeMeans, aes(y = exp(logTotal),
   group = Time)) + theme_few() + xlab("Distance of Isolation") +
   ylab("Total abundance [log scale]") + scale_y_log10(breaks=c(2,5,10,20))
plot of chunk box4.10seaweedinterplot
plot of chunk box4.10seaweedinterplot

Alternatively, for a simpler plot without the data points on it, try:

interaction.plot(seaweed$Dist, seaweed$Time, ft_seaweedFact$fitted,
      xlab="Isolation of patch", ylab="Total density [log]", trace.label="Time")
plot of chunk box4.10seaweedinterplot2
plot of chunk box4.10seaweedinterplot2

Code Box 4.11: Uh oh… anova gone wrong

data(seaweed)
ft_nofactor=lm(log(Total)~Time*Dist,data=seaweed)
anova(ft_nofactor)
#> Analysis of Variance Table
#> 
#> Response: log(Total)
#>           Df  Sum Sq Mean Sq F value  Pr(>F)  
#> Time       1  0.2433 0.24333  0.6671 0.41771  
#> Dist       1  0.7164 0.71635  1.9640 0.16691  
#> Time:Dist  1  1.0303 1.03031  2.8248 0.09871 .
#> Residuals 53 19.3313 0.36474                  
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Code Box 4.12: Tukey’s comparisons don’t work for main e ects in an orthogonal design, as seen for Exercise 4.9:

 seaweed$Dist = factor(seaweed$Dist)
 seaweed$Time = factor(seaweed$Time)
 seaweed$logTot = log(seaweed$Total)
 ft_seaweedFact = lm(logTot~Time*Dist, data=seaweed)
 library(multcomp)
 contFact = mcp(Dist="Tukey") # telling R to compare on the Dist factor
 compFact = glht(ft_seaweedFact, linfct=contFact) # run multiple comparisions
#> Warning in mcp2matrix(model, linfct = linfct): covariate interactions found -- default contrast might be
#> inappropriate

Code Box 4.13: Tukey’s comparisons for a main e ect of Dist for Exercise 4.6, assuming no interaction.

 ft_seaweedMain=lm(logTot~Time+Dist,data=seaweed) # note it is + not *
 contrast = mcp(Dist="Tukey") # telling R to compare on the Dist factor
 compDistMain = glht(ft_seaweedMain, linfct=contrast)
 confint(compDistMain)
#> 
#>   Simultaneous Confidence Intervals
#> 
#> Multiple Comparisons of Means: Tukey Contrasts
#> 
#> 
#> Fit: lm(formula = logTot ~ Time + Dist, data = seaweed)
#> 
#> Quantile = 2.4109
#> 95% family-wise confidence level
#>  
#> 
#> Linear Hypotheses:
#>             Estimate lwr      upr     
#> 2 - 0 == 0   0.72650  0.28778  1.16521
#> 10 - 0 == 0  0.45838  0.03889  0.87787
#> 10 - 2 == 0 -0.26812 -0.70683  0.17060

Code Box 4.14: Tukey’s comparisons for all possible treatment combinations for Exercise 4.6.

This approach is wasteful as it compares some pairs we are not interested in (e.g. 2.10 vs 0.5).

 td = interaction(seaweed$Dist,seaweed$Time)
 ft_seaweedInt=lm(logTot~td,data=seaweed) # Time*Dist as a single term
 contInt = mcp(td="Tukey") # telling R to compare on all Time*Dist levels
 compDistInt = glht(ft_seaweedInt, linfct=contInt)
 summary(compDistInt)
#> 
#>   Simultaneous Tests for General Linear Hypotheses
#> 
#> Multiple Comparisons of Means: Tukey Contrasts
#> 
#> 
#> Fit: lm(formula = logTot ~ td, data = seaweed)
#> 
#> Linear Hypotheses:
#>                   Estimate Std. Error t value Pr(>|t|)   
#> 2.5 - 0.5 == 0      0.4356     0.2391   1.822   0.4605   
#> 10.5 - 0.5 == 0     0.1013     0.2391   0.424   0.9982   
#> 0.10 - 0.5 == 0    -0.2643     0.2391  -1.105   0.8766   
#> 2.10 - 0.5 == 0     0.7852     0.2635   2.980   0.0476 * 
#> 10.10 - 0.5 == 0    0.5512     0.2391   2.305   0.2104   
#> 10.5 - 2.5 == 0    -0.3343     0.2391  -1.398   0.7272   
#> 0.10 - 2.5 == 0    -0.6999     0.2391  -2.927   0.0541 . 
#> 2.10 - 2.5 == 0     0.3496     0.2635   1.327   0.7684   
#> 10.10 - 2.5 == 0    0.1156     0.2391   0.483   0.9965   
#> 0.10 - 10.5 == 0   -0.3656     0.2391  -1.529   0.6468   
#> 2.10 - 10.5 == 0    0.6839     0.2635   2.596   0.1168   
#> 10.10 - 10.5 == 0   0.4499     0.2391   1.882   0.4240   
#> 2.10 - 0.10 == 0    1.0495     0.2635   3.983   0.0029 **
#> 10.10 - 0.10 == 0   0.8155     0.2391   3.411   0.0151 * 
#> 10.10 - 2.10 == 0  -0.2340     0.2635  -0.888   0.9475   
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#> (Adjusted p values reported -- single-step method)

Code Box 4.15: Tukey’s comparisons for Dist within each sampling time, for Exercise 4.6.

This is the best approach to use if you think there is an interaction and are primarily interested in Dist.

 levels(seaweed$Time) = c("five","ten") #need non-numbers for mcp to work
 levels(seaweed$Dist) = c("Zero","Two","Ten")
 td = interaction(seaweed$Dist,seaweed$Time)
 ft_seaweedInt=lm(log(Total)~td,data=seaweed) # Time*Dist as a single term
 contDistinTime = mcp(td = c("Two.five - Zero.five = 0",
                             "Ten.five - Zero.five = 0",
                             "Ten.five - Two.five = 0",
                             "Two.ten - Zero.ten = 0",
                             "Ten.ten - Zero.ten = 0",
                             "Ten.ten - Two.ten = 0"))
 compDistinTime = glht(ft_seaweedInt, linfct=contDistinTime)
 summary(compDistinTime)
#> 
#>   Simultaneous Tests for General Linear Hypotheses
#> 
#> Multiple Comparisons of Means: User-defined Contrasts
#> 
#> 
#> Fit: lm(formula = log(Total) ~ td, data = seaweed)
#> 
#> Linear Hypotheses:
#>                           Estimate Std. Error t value Pr(>|t|)   
#> Two.five - Zero.five == 0   0.4356     0.2391   1.822  0.31173   
#> Ten.five - Zero.five == 0   0.1013     0.2391   0.424  0.99083   
#> Ten.five - Two.five == 0   -0.3343     0.2391  -1.398  0.57120   
#> Two.ten - Zero.ten == 0     1.0495     0.2635   3.983  0.00127 **
#> Ten.ten - Zero.ten == 0     0.8155     0.2391   3.411  0.00714 **
#> Ten.ten - Two.ten == 0     -0.2340     0.2635  -0.888  0.87445   
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#> (Adjusted p values reported -- single-step method)

Code Box 4.16: Testing for an interaction in an ANCOVA for density of epifauna as a function of Dist and algal wet mass.

 lmMassDistInter=lm(logTot~log(Wmass)*Dist,data=seaweed)
 anova(lmMassDistInter)
#> Analysis of Variance Table
#> 
#> Response: logTot
#>                 Df  Sum Sq Mean Sq F value    Pr(>F)    
#> log(Wmass)       1  7.7216  7.7216 35.3587 2.489e-07 ***
#> Dist             2  2.1415  1.0708  4.9032   0.01128 *  
#> log(Wmass):Dist  2  0.3208  0.1604  0.7345   0.48475    
#> Residuals       51 11.1374  0.2184                      
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Exercise 4.8: Global plant height

Do the effects on plant height of latitude and rainfall interact?

We need an interaction term in the model, but because lat and rain are both quantitative, this is a quadratic term and other quadratic terms should enter the model too, as in Code Box 4.17.

Code Box 4.17: Using R to fit a quadratic model to the plant height data of Exercise 3.1.

 ft_latRain2 = lm(log(height)~poly(rain,lat,degree=2),data=globalPlants)
 summary(ft_latRain2)
#> 
#> Call:
#> lm(formula = log(height) ~ poly(rain, lat, degree = 2), data = globalPlants)
#> 
#> Residuals:
#>     Min      1Q  Median      3Q     Max 
#> -3.3656 -0.9546 -0.0749  0.9775  3.1311 
#> 
#> Coefficients:
#>                                Estimate Std. Error t value Pr(>|t|)    
#> (Intercept)                      1.1675     0.2094   5.577 1.44e-07 ***
#> poly(rain, lat, degree = 2)1.0   5.7178     2.3419   2.441  0.01603 *  
#> poly(rain, lat, degree = 2)2.0  -1.1417     2.0304  -0.562  0.57493    
#> poly(rain, lat, degree = 2)0.1  -5.0623     1.8212  -2.780  0.00628 ** 
#> poly(rain, lat, degree = 2)1.1  -6.1984    38.1037  -0.163  0.87104    
#> poly(rain, lat, degree = 2)0.2  -2.3615     2.5031  -0.943  0.34729    
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#> 
#> Residual standard error: 1.441 on 125 degrees of freedom
#> Multiple R-squared:  0.2706, Adjusted R-squared:  0.2415 
#> F-statistic: 9.277 on 5 and 125 DF,  p-value: 1.558e-07

Exercise 4.9: Snowmelt and time to flowering

Does time from snowmelt to flowering vary with snowmelt date, beyond that explained by elevation? If so, how does it vary?

The data are available as snowmelt in the ecostats package, averaged over measurements taken at three sampling times. Answer the research questions using the appropriate linear model, being sure to check your assumptions.

 data(snowmelt)
 plot(flow~snow,data=snowmelt)
plot of chunk ex4.9snowmelt
plot of chunk ex4.9snowmelt
 snowReduced = na.omit(snowmelt[,c("flow","snow","elev")]) #this line not normally needed, lm can handle NA's, but seems needed because of a weird conflict with MCMCglmm
 ft_snow = lm(flow~elev+snow, data=snowReduced)
 par(mfrow=c(1,2),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
 plotenvelope(ft_snow, n.sim=99)
plot of chunk ex4.9snowmeltenv
plot of chunk ex4.9snowmeltenv

(Note that plotenvelope was run with just 99 iterations, to speed up computation time.)

This doesn’t look great, there is the occasional large value for flowering time, and a suggestion of non-linearity (note from the scatterplot that at early snowmelt dates there is a strong decreasing relationship, but it can’t continue to increase at the same rate because then flowering time would become negative). Try log-transforming flowering time…

 plot(flow~snow,data=snowmelt,log="y")
#> Warning in xy.coords(x, y, xlabel, ylabel, log): 1 y value <= 0 omitted from logarithmic plot
plot of chunk ex4.9snowmeltlog
plot of chunk ex4.9snowmeltlog
 snowReduced$logFlow = log(snowReduced$flow)
 snowReduced2 = snowReduced[snowReduced$logFlow>-Inf,] # look it's a bit naughty, removing the infinite value, but no biggie as only one value
 ft_logsnow = lm(logFlow~elev+snow, data=snowReduced2)
 par(mfrow=c(1,2),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
 plotenvelope(ft_logsnow, n.sim=99)
plot of chunk ex4.9snowmeltlogEnv
plot of chunk ex4.9snowmeltlogEnv
 summary(ft_logsnow)
#> 
#> Call:
#> lm(formula = logFlow ~ elev + snow, data = snowReduced2)
#> 
#> Residuals:
#>      Min       1Q   Median       3Q      Max 
#> -0.90161 -0.15794  0.02338  0.15834  1.08662 
#> 
#> Coefficients:
#>               Estimate Std. Error t value Pr(>|t|)    
#> (Intercept)  3.8805208  0.3193019  12.153  < 2e-16 ***
#> elev         0.0003357  0.0001226   2.739  0.00651 ** 
#> snow        -0.0103172  0.0007551 -13.663  < 2e-16 ***
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#> 
#> Residual standard error: 0.2909 on 316 degrees of freedom
#> Multiple R-squared:  0.3774, Adjusted R-squared:  0.3735 
#> F-statistic: 95.78 on 2 and 316 DF,  p-value: < 2.2e-16
 confint(ft_logsnow)
#>                     2.5 %        97.5 %
#> (Intercept)  3.252294e+00  4.5087472418
#> elev         9.457986e-05  0.0005768232
#> snow        -1.180299e-02 -0.0088315037

(Note that plotenvelope was run with just 99 iterations, to speed up computation time.)

So as snowmelt date increases by 10 days, log(flowering time) decreases by between 0.12 and 0.09 (meaning about a 9-12% decrease).

(Aside: Strictly speaking, snow should not be treated as a linear variable because it is a time-of-year variable, so is a cyclical variable with a period of 365. But in this case the values are all focussed over a few months towards the middle of the year so a linear approximation is OK.)

Exercise 4.10: Bird exclusion and biological control

Is there an effect of the netting treatment on changes in aphid numbers across the sampling times?

data(aphidsBACI)
str(aphidsBACI)
#> 'data.frame':    16 obs. of  5 variables:
#>  $ Plot     : Factor w/ 8 levels "1","2","3","4",..: 1 2 3 4 5 6 7 8 1 2 ...
#>  $ Treatment: Factor w/ 2 levels "excluded","present": 2 2 2 2 1 1 1 1 2 2 ...
#>  $ Time     : Factor w/ 2 levels "X18.06.","X15.07.": 1 1 1 1 1 1 1 1 2 2 ...
#>  $ counts   : int  78 71 122 271 119 152 120 202 60 48 ...
#>  $ logcount : num  4.37 4.28 4.81 5.61 4.79 ...
plot(logcount~interaction(Time,Treatment),data=aphidsBACI)
plot of chunk ex4.10aphidnetting
plot of chunk ex4.10aphidnetting

OK log(count) looks fine, different treatments have similar variation. Eyeballing the data it looks like there is a treatment effect, with many less aphids in the excluded group than in the control…

When building a model, we need to take into account the pairing of the data – Ingo and friends took repeated measures in each plot, so we include Plot as a blocking variable to account for this. This in turn means there is no need for a Treatment main effect, because different plots received different treatments.

 par(mfrow=c(1,3),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
lm_aphids = lm(logcount~Plot+Time+Treatment:Time,data=aphidsBACI)
plotenvelope(lm_aphids,which=1:3, n.sim=99)
plot of chunk ex4.10aphidlm
plot of chunk ex4.10aphidlm

(Note that plotenvelope was run with just 99 iterations, to speed up computation time.)

This all looks fine to me. The term if interest is Treatment:Time, which tells us if changes in aphids over time varied due to the bird exclusion treatment:

anova(lm_aphids)
#> Analysis of Variance Table
#> 
#> Response: logcount
#>                Df Sum Sq Mean Sq F value   Pr(>F)   
#> Plot            7 0.8986  0.1284  0.4603 0.833357   
#> Time            1 5.4675  5.4675 19.6038 0.004434 **
#> Time:Treatment  1 0.7397  0.7397  2.6522 0.154527   
#> Residuals       6 1.6734  0.2789                    
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

There is no evidence of an interaction, meaning there is no evidence of an effect of bird exclusion on aphid numbers. Oh :(

I guess the reason for this is that the levels of replication were low – there were only eight plots, four in each treatment, so an effect would have to be very strong to be statistically significant.

Exercise 4.11: Seaweed, snails and three factors

data(seaweed)
str(seaweed)
#> 'data.frame':    57 obs. of  22 variables:
#>  $ Size  : chr  "SMALL" "SMALL" "SMALL" "SMALL" ...
#>  $ Dist  : int  0 0 0 0 0 2 2 2 2 2 ...
#>  $ Time  : int  5 5 5 5 5 5 5 5 5 5 ...
#>  $ Rep   : int  1 2 3 4 5 1 2 3 4 5 ...
#>  $ Wmass : num  15.8 13.1 25.1 29.7 17.4 13.3 4.7 6.8 7.7 14.3 ...
#>  $ Amph  : num  75 16 14 21 55 17 9 11 28 37 ...
#>  $ Cope  : num  0 7 37 37 0 14 6 29 21 83 ...
#>  $ Poly  : num  17 8 2 5 1 2 1 3 6 10 ...
#>  $ Anem  : num  2 0 0 0 0 0 0 1 0 0 ...
#>  $ Iso   : num  0 2 1 1 15 0 12 51 19 56 ...
#>  $ Bival : num  3 2 1 0 0 2 0 4 3 0 ...
#>  $ Gast  : num  6 18 33 9 9 1 10 7 4 15 ...
#>  $ Turb  : num  1 0 0 0 0 0 0 0 0 0 ...
#>  $ Prawn : num  0 0 0 0 5 1 0 0 0 1 ...
#>  $ Urchin: num  0 0 0 0 0 0 0 0 0 0 ...
#>  $ Fish  : num  0 0 0 0 1 0 0 0 0 0 ...
#>  $ Crab  : num  0 1 1 0 0 0 0 1 0 0 ...
#>  $ Caddis: num  0 0 0 0 1 0 0 0 0 0 ...
#>  $ Opi   : num  0 1 0 1 0 0 0 0 0 0 ...
#>  $ Ost   : num  0 0 6 3 0 0 1 1 0 11 ...
#>  $ Bstar : num  0 0 0 0 0 0 0 0 0 1 ...
#>  $ Total : num  6.58 4.2 3.78 2.59 5 ...
seaweed$logTot = log(seaweed$Total)
seaweed$Dist = factor(seaweed$Dist)
par(mar=c(4,7,1,1))
plot(logTot~interaction(Dist,Size,Time),data=seaweed,xlab="",ylab="Total abundance [log scale]",horizontal=TRUE,col=2:4,las=1)
legend("topleft",legend=paste0("Dist=",levels(seaweed$Dist)),pch=15,col=2:4,pt.cex=2)
plot of chunk ex4.11seaweed3
plot of chunk ex4.11seaweed3

All good so far, no obvious trend, except that Dist=0 seems to have lower total abundance at most times/sizes. Will analyse as a three-way ANOVA

 par(mfrow=c(1,3),mar=c(3,3,1,1),mgp=c(1.75,0.75,0))
ft_seaweed3 = lm(log(Total)~Size*Time*Dist,data=seaweed)
plotenvelope(ft_seaweed3,which=1:3, n.sim=99)
plot of chunk ex4.11seaweedanova3
plot of chunk ex4.11seaweedanova3
anova(ft_seaweed3)
#> Analysis of Variance Table
#> 
#> Response: log(Total)
#>                Df  Sum Sq Mean Sq F value    Pr(>F)    
#> Size            1  0.9940 0.99399  3.5849 0.0647472 .  
#> Time            1  0.1923 0.19234  0.6937 0.4093064    
#> Dist            2  4.7737 2.38686  8.6084 0.0006829 ***
#> Size:Time       1  0.0605 0.06055  0.2184 0.6425429    
#> Size:Dist       2  0.1800 0.09000  0.3246 0.7244968    
#> Time:Dist       2  1.4117 0.70583  2.5456 0.0896686 .  
#> Size:Time:Dist  2  1.2318 0.61592  2.2214 0.1202189    
#> Residuals      45 12.4772 0.27727                      
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

(Note that plotenvelope was run with just 99 iterations, to speed up computation time.)

From the plots, we can’t see any problems with assumptions.

The ANOVA suggests a main effect of Dist, with marginal evidence of an interaction with Time (judging from the boxplots, this is probably because of the larger values for logTot at Time=5 in large plots).

We could reanalyse the data including Wmass as a covariate, for a three-factor ANCOVA:

ft_seaweedW3 = lm(logTot~Wmass*Size*Time*Dist,data=seaweed)
anova(ft_seaweedW3)
#> Analysis of Variance Table
#> 
#> Response: logTot
#>                      Df Sum Sq Mean Sq F value    Pr(>F)    
#> Wmass                 1 6.7793  6.7793 28.2266 7.328e-06 ***
#> Size                  1 0.7106  0.7106  2.9585  0.094792 .  
#> Time                  1 0.0747  0.0747  0.3109  0.580899    
#> Dist                  2 2.8114  1.4057  5.8529  0.006675 ** 
#> Wmass:Size            1 0.0941  0.0941  0.3917  0.535700    
#> Wmass:Time            1 0.0233  0.0233  0.0970  0.757459    
#> Size:Time             1 0.3501  0.3501  1.4579  0.235849    
#> Wmass:Dist            2 0.1979  0.0990  0.4121  0.665636    
#> Size:Dist             2 0.0886  0.0443  0.1844  0.832475    
#> Time:Dist             2 1.3263  0.6631  2.7611  0.077848 .  
#> Wmass:Size:Time       1 0.0081  0.0081  0.0337  0.855482    
#> Wmass:Size:Dist       2 0.1404  0.0702  0.2924  0.748389    
#> Wmass:Time:Dist       2 0.2767  0.1384  0.5761  0.567645    
#> Size:Time:Dist        2 0.3440  0.1720  0.7162  0.496020    
#> Wmass:Size:Time:Dist  2 0.1701  0.0850  0.3540  0.704475    
#> Residuals            33 7.9257  0.2402                      
#> ---
#> Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

We get pretty much the same results. Wmass seems to be an important covariate, but after controlling for it, there is still a strong Dist main effect and not much else happening.