iemisc 1.0.5 (5 June 2024)
- Re-submitted the package due to the removal & readmittal of the
iemiscdata
package.
- Replaced as.numeric with drop_units in the engr_survey function.
Made other revisions in the engr_survey & engr_survey_reverse
functions.
- Revised the reduce_single_digit function to allow for dates with
/s
iemisc 1.0.4 (25 September
2023)
- Received an e-mail issue from Kurt Hornik on 19 August 2023
regarding the use of “@docType package” which is no longer valid.
Replaced the iemisc.R file with iemisc-package.R to reflect the
requested change.
- Added the
chem.databases
package to Imports to replace
CHNOSZ
which has been removed from Imports
- Added
printr
to Suggests to allow the printing of help
functions in the vignettes & added tibble
and
lintr
to Suggests
- Modified the Help section on the README again & Added the
additional available function to the README
- Revised the URL for Urban Hydrology for Small Watersheds Technical
Release 55 (TR-55) in the weighted_CN function Reference. Revised
various other URLs to get
iemisc
accepted into CRAN. Used
the ResearchGate version of certain articles or the Internet Archive:
Wayback Machine archive for other URLs that had issues.
- Revised the air_stripper function to search for the CAS Number in
the atsdr_tsca_ld50_a data set of the
chem.databases
package. Also revised the package to obtain the molecular formulas and
average mass from the chem_wiki data set of the
chem.databases
package
- Added the “%inorder%” function to return character vectors in a
given sequence
- Added the c_composite_CN function for connected impervious
areas
- Added the uc_composite_CN function for unconnected impervious
areas
- Replaced the T for temperature variable with Temp for temperature in
all functions after doing a
lintr
check on the package to
attempt to locate an error causing the references not to be valid in the
Manningtrap function
- Added an additional contributor for the “%inorder%” function
- Created the Sound Frequencies & Nikola Tesla’s 3-6-9 Theory
vignette and modified all other vignettes. The most significant
revisions were made in the Comparing Other Hydraulic Software Output to
iemisc’s Manningtrap for Critical Conditions & Construction
Measurement Examples vignettes
iemisc 1.0.3 (3 May 2023)
- Modified the Help section and the package introduction on the
README
- Revised the non-standard evaluation of library calls to standard
evaluation calls in the README and in all functions
- Revised some grammatical issues in various functions
- Revised the splitcomma function to allow for a set of names in a
single character vector to be separated by ” & ”
- Revised the reduce_single_digit function to allow for date times and
vectors with decimals
- Revised all of the vignettes – removed the PNG image for the
Creative Commons license due to it failing consistently on certain OSes.
Also added the EcoC²S services link to all of the vignettes as
well.
- Added the notchin function (Negate chin from
data.table
and Negate in from base
R) to determine which character or
numeric vectors are not in a set of character or numeric vectors
- Added the surface_area (for calculating the linear surface area)
& rain_garden_driveway (for sizing a rain garden based on driveway
surface areas) functions
- Removed
qdapTools
from Imports as Prof Brian Ripley
sent an e-mail that qdapTools
is scheduled for archival on
6 May 2023 due to failing the CRAN checks. The lookupQT (lookup in
qdapTools
) and lookup_helperQT (lookup_helper in
qdapTools
) functions have been added to the package to
avoid iemisc
from being archived on that date too. The
existing functions have been modified to use lookupQT instead of
lookup.
iemisc 1.0.2 (4 March 2023)
- CRAN update to move from archived back to active state
- Added
formatR
to Suggests to fix the CRAN ERROR message
on certain systems & added pander
to Suggests to print
better LaTeX tables for the vignettes. Some of the tables in the
vignettes are created using kable from knitr
.
- Modified
octave
to octave eval = FALSE
in
vignettes where GNU Octave was called to avoid the CRAN ERROR message on
certain systems where GNU Octave was not present
- Added a check in the frac_to_numeric function to issue an error
message when the length of n > 1 exists to correct the failed tests
on some systems
- Added both author and encoding fields to the various functions where
those 2 items were missing [f2, f3, f4, f5, f6, f7, f8, kin_visc_water,
lat_long2utm, Manningcircy, Manningtrap_critical, Re2, Re3, Re4]
- Added more assert_that clauses to both the weighted_CN and
weighted_C functions
- Modified the vignette encoding for all of the vignettes
- Added the rational_equation function which calculates the peak flow
using the modified rational method equation
iemisc 1.0.1 (13 February
2023)
- Received an e-mail issue from Prof Brian Ripley on 13 February 2023
regarding the check results which need to be corrected
- Re-added
ie2misc
to Suggests to fix the CRAN NOTE
- Changed an instance of http to https in all of the vignettes
iemisc 1.0.0 (10 February
2023)
- created the following new functions: “%//%”, “%qsin%”, CompIntCharg,
Manningtrap_critical, Mod_octave, Re1, Re2, Re3, Re4, Rem, SimpIntCharg,
air_stripper, colebrook, concr_mix_lightweight_strength,
concr_mix_normal_strength, construction_decimal,
construction_decimal_eng, construction_fraction, density_water,
dyn_visc_water, engr_survey, engr_survey2, engr_survey3, engr_survey4,
engr_survey_batch, engr_survey_reverse, f1, f2, f3, f4, f5, f6, f7, f8,
frac_to_numeric, fractdiff, igivenICPn, iscolumn, isrow, kin_visc_water,
lat_long2state, lat_long2utm, maxmre, mortality_rate,
mortality_rate_pct, mre, ndims, polygon_area, project_midpoint,
prop_mortality_ratio, prop_solver, reduce_single_digit,
sat_vapor_pressure, sat_vapor_pressure_ice, sec, secprop, sp_gravity,
sp_volume, splitcomma, splitremove, surf_tens_water, unit_wt,
weighted_C, and weighted_CN
- These were the previous functions available as of
iemisc
0.9.9: AF, AP, AgivenF, AgivenFcont, AgivenG,
AgivenP, AgivenPcont, CompIntPaid, EffInt, FA, FP, FgivenA, FgivenAcont,
FgivenP, FgivenPcont, Manningcirc, Manningcircy, Manningpara,
Manningrect, Manningtrap, Manningtri, PA, PF, PgivenA, PgivenA1,
PgivenAcont, PgivenF, PgivenFcont, PgivenFivary, PgivenG, SimpIntPaid,
acosd, acotd, acscd, approxerror, asecd, asind, atan2d, atand,
benefitcost, cosd, cotd, cscd, cv, igivenPFn, length_octave, n,
na.interp1, nc1, nc2, nc3, nc4, ngivenPFi, numel, ranges, relerror,
righttri, rms, secd, sgm, shm, sind, size, tand, and volsphere
- Revised the CITATION file
- Removed
Rcpp
(>= 0.11.5),ie2misc
,
NISTunits
, and optiRum
from Suggests &
testit
and rgdal
(being retired in 2023) from
Imports
- Added the following packages to Imports:
anytime
,
assertthat
, berryFunctions
,
checkmate
, foreach
, geosphere
,
ggplot2
, ggpubr
, lubridate
,
matlab
, matlab2r
, measurements
,
methods
, mgsub
, qdapRegex
,
qdapTools
, ramify
, rivr
,
roperators
, round
, sf
,
signal
, sjmisc
, units
,
USA.state.boundaries
, and utils
- Added
assertthat
and checkmate
to Imports
to simplify the internal testing of the package functions (previously
if-else statements were used). Made revisions to all of the functions to
use the newly imported packages.
- Added the following packages to Suggests:
aiRthermo
,
callr
, flextable
, fractional
,
fracture
, geometry
, hydraulics
,
import
, linguisticsdown
, maps
,
MASS
, rando
, sampler
,
spelling
, and tinytest
- Added
rando
to Suggests. Replaced set.seed and rnorm
from stats
with set_n and r_norm from rando
in
the examples.
- Created passing tests for many of the functions using
tinytest
- Revised existing vignettes and created new vignettes. Added more
examples and/or vignettes for the pre-existing functions. Many of the
examples and/or the functions themselves for the previous functions were
revised too.
- Used the Internet Archive Wayback Machine to retrieve lost URLs, as
needed
- Changed most import statements to importFrom statements after an
issue was filed about
data.table
and zoo
conflicts (Issue #3 by Toby Dylan Hocking)
- Now using the try function for examples that may possibly fail
(source references are in the function source declarations)
- Replaced round with round_r3 throughout the functions
- Added the f1, f2, f3, f4, f5, f6, f7, f8, and colebrook functions to
deal with the Darcy friction factor (f)
- Added the Re1, Re2, Re3, and Re4 functions to calculate the Reynolds
number
- Added the weighted_C and weighted_CN functions for the weighted C
factor and the weighted curve number, respectively
- Added the Manningtrap_critical function to calculate the critical
values for a trapezoidal open channel cross-section.
- Added the sat_vapor_pressure, sat_vapor_pressure_ice, density_water,
dyn_visc_water, kin_visc_water, sp_gravity, sp_volume, unit_wt, and
surf_tens_water functions to replace the former dependency on the
archived
IAPWS95
package and for use in the open channel
flow functions (Manning…)
- Added the engr_survey, engr_survey2, engr_survey3, engr_survey4,
engr_survey_batch, engr_survey_reverse, lat_long2state,
project_midpoint, and lat_long2utm functions for dealing with
engineering survey measurements mostly in Kentucky and Tennessee, but
also globally for other functions
- Added the air_stripper function to size air strippers for removing
volatile organic compounds from liquids
- Added the concr_mix_lightweight_strength [Concrete Mix Design for
Structural Lightweight Concrete] and concr_mix_normal_strength [Concrete
Mix Design for Normal Strength Concrete] functions. The trial batch
volume can be specified for the concr_mix_normal_strength function. For
the use of Table 3.3 (determining the water-cement ratio by weight) in
the concr_mix_normal_strength function,
pracma
s interp1 is
now used for the cases where the compressive strength value is not
present in the Table (see the Reference source for the Table).
- Added secprop function to calculate and plot section properties. It
was written for compatibility with a GNU Octave/MATLAB function.
- Added polygon_area function to calculate the area of a polygon using
the Shoelace formula and to plot the polygon
- Added SimpIntCharg and CompIntCharg functions to calculate the
simple interest and the compound interest charged only
- Added the igivenICPn function to calculate the simple interest rate
given interest charged, number of years, and principal value
- Changed the output table format for benefitcost function from a
data.frame
to a data.table
- Added the construction_decimal, construction_fraction,
construction_decimal_eng, and frac_to_numeric functions to work with
construction measurements. Also, frac_to_numeric can work with plain
fractions.
- Added ndims, isrow, iscolumn, sec, fractdiff, Mod_octave, and Rem
functions & modified the size function for GNU Octave/MATLAB
compatibility
- Added floor division (“%//%”) function for Python compatibility
- Added “%qsin%” function to perform a quick search
- Added the splitcomma and splitremove functions to transform Second
String, First String to First String Second String and remove certain
characters from a string, respectively
- Added maxmre and mre functions to calculate the maximum mean
relative error (MAXRE) and mean relative error (MRE), respectively
- Added mortality_rate, mortality_rate_pct, and prop_mortality_ratio
functions to determine mortality rates
- Added prop_solver function to solve for the missing value in a
proportion
- Added reduce_single_digit function to sum all digits of a number to
a single digit (useful for Numerology)
- Added various people as authors/contributors for their respective
codes in both the DESCRIPTION file and in the functions themselves
iemisc 0.9.9
- CRAN request for
IAPWS95
package to be corrected or
archived which would impact this package. The functions requiring
IAPWS95
have been re-written so that IAPWS95
can be removed from Imports
iemisc 0.9.8
- CRAN request for
listless
package to be corrected or
archived which would impact this package. The functions requiring
listless
have been re-written so that listless
can be removed from Imports
- Request from Matt Dowle to have
data.table
as Imports
rather than Depends
- Added English United States (en-us) as the language in the
DESCRIPTION file
- Removed the
financial
package as Suggests as it was
removed from CRAN
- Added quotes around package names (standard evaluation) in README.md
and in all function examples
iemisc 0.9.7
- CRAN fix of example from PgivenG
iemisc 0.9.6
- Revised the vignette and changed the vignette filename and
title
- Added
iemiscdata
and import
as imported R
packages (Issue #1 by jangorecki)
- Added
iemiscdata
and import
as imports in
functions as needed (Issue #1 by jangorecki)
- Added the concr_mix_normal_strength function [Concrete Mix Design
for Normal Strength (Normal-weight) Concrete] – Although that was the
plan for version 0.9.6, this did not happen until version 1.0.0
- Added
gsubfn
and fpCompare
as imported R
packages for the concr_mix_normal_strength function – Although that was
the plan for version 0.9.6, this did not happen until version 1.0.0
iemisc 0.9.5
- Added GNU Octave/MATLAB compatible trigonometric functions in
degrees (cosd, acosd, sind, asind, tand, atand, secd, asecd, cscd,
acscd, cotd, acotd, atan2d)
iemisc 0.9.2
- Added
ie2misc
, ie2miscdata
as suggested R
packages
iemisc 0.9.1
- Added more examples to the README.md
- Revised the examples in these functions: Manningtri, Manningtrap,
Manningrect, Manningpara, Manningcirc
- Updated the Open Channel Flow problems vignette
iemisc 0.9.0
- Updated these functions: Manningtri, Manningtrap, Manningrect,
Manningpara, Manningcirc
- Added an Open Channel Flow problems vignette
- Added
install.load
as a suggested R package
iemisc 0.5.2
- Updated these functions: size, righttri, Manningtri, Manningtrap,
Manningrect, Manningpara, Manningcirc
iemisc 0.5.1
- Renamed lengths to length_octave
- Updated these functions: size, righttri, Manningtri, Manningtrap,
Manningrect, Manningpara, Manningcirc
- Added
iemiscdata
as a suggested R package
iemisc 0.5.0