Main functionalities

library(joyn)

Overview

πŸ“Œ In joyn, there are two major sets of tools to join data tables:

  1. The primary function joyn()

  2. Dplyr-like join functions: left_join(), right_join(), full_join(), inner_join()

This vignette will explore the main function joyn(). You can read about dplyr-joins in the β€œdplyr-joins” article instead.

General use


library(joyn)
library(data.table)

x1 <- data.table(id = c(1L, 1L, 2L, 3L, NA_integer_),
                 t  = c(1L, 2L, 1L, 2L, NA_integer_),
                 x  = 11:15)

y1 <- data.table(id = c(1,2, 4),
                 y  = c(11L, 15L, 16))


x2 <- data.table(id = c(1, 4, 2, 3, NA),
                 t  = c(1L, 2L, 1L, 2L, NA_integer_),
                 x  = c(16, 12, NA, NA, 15))


y2 <- data.table(id = c(1, 2, 5, 6, 3),
                 yd = c(1, 2, 5, 6, 3),
                 y  = c(11L, 15L, 20L, 13L, 10L),
                 x  = c(16:20))

x3 <- data.table(id  = c("c","b", "d", "d"),
                 v   = 8:11,
                 foo = c(4,2, 7, 3))

y3 <- data.table(id = c("c","b", "c", "a"),
                 y  = c(11L, 15L, 18L, 20L))


x4 <- data.table(id1 = c(1, 1, 2, 3, 3),
                 id2 = c(1, 1, 2, 3, 4),
                 t   = c(1L, 2L, 1L, 2L, NA_integer_),
                 x   = c(16, 12, NA, NA, 15))

y4 <- data.table(id  = c(1, 2, 5, 6, 3),
                 id2 = c(1, 1, 2, 3, 4),
                 y   = c(11L, 15L, 20L, 13L, 10L),
                 x   = c(16:20))


x5 <- data.table(id      = c(1, 4, 2, 3, NA),
                 t       = c(1L, 2L, 1L, 2L, NA),
                 country = c(16, 12, 3, NA, 15))
  
y5 <- data.table(id      = c(1, 2, 2, 6, 3),
                 gdp     = c(11L, 15L, 20L, 13L, 10L),
                 country = 16:20)

The basics

Let’s suppose that you want to join the two tables x1 and y1.


# Calling joyn() to join x1 and y1

joyn(x = x1,
     y = y1, 
     match_type = "m:1" ) #Note RT: remove this argument once fixing the default value
#>       id     t     x     y  .joyn
#>    <num> <int> <int> <num> <fctr>
#> 1:     1     1    11    11  x & y
#> 2:     1     2    12    11  x & y
#> 3:     2     1    13    15  x & y
#> 4:     3     2    14    NA      x
#> 5:    NA    NA    15    NA      x
#> 6:     4    NA    NA    16      y

The output table is the result of a full join -which is what joyn always executes by the default. This means that the returning table will retains both matching and non matching rows from both x1 and y1. Notice that the resulting table also contains an additional variable called .joyn, which is the reporting variable. (Read below ⬇️)

Reporting variable

A particular feature of joyn is that it includes the reportvar in the returning table, which informs you about the status of the join. You can modify both the name and the format of the reporting variable as follows:

  • Name: by default reportvar = ".joyn", but you can modify it with reportvar = "myname" specifying the name you want to assign

  • Format: by default reporttype = "character" , but you can also set it to numeric using reporttype = "numeric"

You can see the difference between the two types in the table below1:

numeric character meaning
1 x Obs only available in x table
2 y Obs only available in y table
3 x & y Matching obs available in both tables
4 NA updated NAs in x updated with actual values in variables with same names in y
5 value updated Actual values and NAs in x updated with actual values in variables with same names in y
6 not updated Actual values and NAs in x are NOT updated with actual values in y

Key variables

When performing a join, you might want to specify which variable(s) joyn should join by.

While by default joyn will consider the variable(s) in common between x and y as key(s) for the join, our suggestion is to make the keys explicit - i.e., specifying it/them in the by argument


# Join with one variable in common

joyn(x = x1,
     y = y1, 
     by = "id", 
     match_type = "m:1")
#>       id     t     x     y  .joyn
#>    <num> <int> <int> <num> <fctr>
#> 1:     1     1    11    11  x & y
#> 2:     1     2    12    11  x & y
#> 3:     2     1    13    15  x & y
#> 4:     3     2    14    NA      x
#> 5:    NA    NA    15    NA      x
#> 6:     4    NA    NA    16      y

If you don’t want to join by all variables in common between x and y, you can alternately use equivalency as an element of by vector. This specification allows you to join on different variables between x and y.


joyn(x = x4, 
     y = y4, 
     by = c("id1 = id", "id2"), 
     match_type = "m:m")
#>      id1   id2     t     x     y  .joyn
#>    <num> <num> <int> <num> <int> <fctr>
#> 1:     1     1     1    16    11  x & y
#> 2:     1     1     2    12    11  x & y
#> 3:     2     2     1    NA    NA      x
#> 4:     3     3     2    NA    NA      x
#> 5:     3     4    NA    15    10  x & y
#> 6:     2     1    NA    NA    15      y
#> 7:     5     2    NA    NA    20      y
#> 8:     6     3    NA    NA    13      y

Also, notice that joyn will sort the resulting table by key variables in by. This is because sort = TRUE by default.

Match type

πŸ’‘Match type refers to the relationship that exists between the observations of the joining tables. The possibility to perform joins based on the match type is one of the value added of using joyn.

Following Stata’s convention, we can have four different match types:

  1. 1:1 (one to one): the default2, the variables specified in by variables uniquely identify single observations in both table –> each observation in left table has a unique match in the right table and viceversa

  2. 1:m (one to many): only left table is uniquely identified by byvariables –> each observation in by var of the left table can have multiple matches in by var of the right table

  3. m:1 (many to one): only right table is uniquely identified by byvar -> each observation in left table can have only one match in the right table but observations in the right table might have multiple matches in the left table

  4. m:m (many to many): variables in by does not uniquely identify the observations in either table –> both tables can have multiple matches for each observation

We recommend you always specify the match type when joining tables to ensure the output is correct.


# Many to one match type
joyn(x = x1,
     y = y1,
     by = "id",
     match_type = "m:1")
#>       id     t     x     y  .joyn
#>    <num> <int> <int> <num> <fctr>
#> 1:     1     1    11    11  x & y
#> 2:     1     2    12    11  x & y
#> 3:     2     1    13    15  x & y
#> 4:     3     2    14    NA      x
#> 5:    NA    NA    15    NA      x
#> 6:     4    NA    NA    16      y

# Many to many match type
joyn(x = x3,
     y = y3,
     by = "id",
     match_type = "m:m")
#>        id     v   foo     y  .joyn
#>    <char> <int> <num> <int> <fctr>
#> 1:      c     8     4    11  x & y
#> 2:      c     8     4    18  x & y
#> 3:      b     9     2    15  x & y
#> 4:      d    10     7    NA      x
#> 5:      d    11     3    NA      x
#> 6:      a    NA    NA    20      y

# One to one match type - the default
joyn(x = x2,
     y = y2,
     by = "id",
     match_type = "1:1")
#>       id     t     x    yd     y  .joyn
#>    <num> <int> <num> <num> <int> <fctr>
#> 1:     1     1    16     1    11  x & y
#> 2:     4     2    12    NA    NA      x
#> 3:     2     1    NA     2    15  x & y
#> 4:     3     2    NA     3    10  x & y
#> 5:    NA    NA    15    NA    NA      x
#> 6:     5    NA    NA     5    20      y
#> 7:     6    NA    NA     6    13      y

# Same join as:

joyn(x = x2,
     y = y2,
     by = "id")
#>       id     t     x    yd     y  .joyn
#>    <num> <int> <num> <num> <int> <fctr>
#> 1:     1     1    16     1    11  x & y
#> 2:     4     2    12    NA    NA      x
#> 3:     2     1    NA     2    15  x & y
#> 4:     3     2    NA     3    10  x & y
#> 5:    NA    NA    15    NA    NA      x
#> 6:     5    NA    NA     5    20      y
#> 7:     6    NA    NA     6    13      y


# One to many match type 
joyn(x = x5,
     y = y5,
     by = "id",
     match_type = "1:m")
#>       id     t country   gdp  .joyn
#>    <num> <int>   <num> <int> <fctr>
#> 1:     1     1      16    11  x & y
#> 2:     4     2      12    NA      x
#> 3:     2     1       3    15  x & y
#> 4:     2     1       3    20  x & y
#> 5:     3     2      NA    10  x & y
#> 6:    NA    NA      15    NA      x
#> 7:     6    NA      NA    13      y

However, if are unsure/wrong about the relationships between the observations in your tables, joyn will let you know that something is not right. Suppose you think your data is uniquely identified by variable id, while it is not. By setting match_type = "1:1" you will get and error, informing you that the match type is not as expected.


# Merging correctly but getting error because something is not right in the data
joyn(x3, y3, by = "id", match_type = "1:1")
#> βœ– Error: table x is not uniquely identified by id
#> βœ– Error: table y is not uniquely identified by id
#> Error in `check_match_type()`:
#> ! match type inconsistency
#> β„Ή set verbose to TRUE to see where the issue is

# Merging wrongly but getting NO errors because you did not use match_type
joyn(x3, y3, by = "id")
#> βœ– Error: table x is not uniquely identified by id
#> βœ– Error: table y is not uniquely identified by id
#> Error in `check_match_type()`:
#> ! match type inconsistency
#> β„Ή set verbose to TRUE to see where the issue is

If instead you don’t care about match types or you don’t think it is necessary to use them for your particular needs, you might be fine without joyn.

Type of join

Join type determines which observations will be kept after the join. joyn() allows you to choose which type of join to execute via the keep argument.

This argument is called keep rather than join_type to avoid confusion with the argument match_type, and in order to reflect that what you are specifying in the end is which observations you want to keep. This argument plays the role of allowing joyn() to mimic the behavior of dplyr’s functions left_join, right_join, inner_join, and full_join, the default.

keep can be of four types:

An important feature: JOYn report and info display

Recall that joyn is intended to be informative about the status and quality of the merging.

πŸ“Š JOYn report

By default, joyn returns the JOYn report , i.e., a summary table of the merging. This includes the reporting variable, the number of rows that come from x, the number of rows that come from y and those that are common to both x and y. This info is also shown in percentage form in the percent column.


joyn(x = x3, 
     y = y3, 
     by = "id", 
     match_type = "m:m",
     verbose = TRUE)
#> 
#> ── JOYn Report ──
#> 
#>   .joyn n percent
#> 1     x 2   33.3%
#> 2     y 1   16.7%
#> 3 x & y 3     50%
#> 4 total 6    100%
#> ────────────────────────────────────────────────────────── End of JOYn report ──
#> β„Ή Note: Joyn's report available in variable .joyn
#> β„Ή Note: Removing key variables id from id and y
#>        id     v   foo     y  .joyn
#>    <char> <int> <num> <int> <fctr>
#> 1:      c     8     4    11  x & y
#> 2:      c     8     4    18  x & y
#> 3:      b     9     2    15  x & y
#> 4:      d    10     7    NA      x
#> 5:      d    11     3    NA      x
#> 6:      a    NA    NA    20      y

πŸ“ Displaying messages

One of the value added of joyn is that it produces a number of messages that are intended to inform you about the status of the join. The display of such messages is controlled by the argument verbose, which allows you to show (verbose = TRUE) or silent (verbose = FALSE) any messages.

To further explore messages in joyn, please refer to the β€œMessages” article.


  1. For a better understanding of the meaning column check the β€œAdvanced functionalities” articleβ†©οΈŽ

  2. Notice that in the previous version default match type was β€œm:m” instead.β†©οΈŽ