The aim of optimum contribution selection is to find the optimum number of offspring for each breeding animal and to determine if a young animal (a selection candidate) should be selected for breeding or not. This is done in an optimal way, i.e. in a way that ensures that genetic gain is achieved, and that genetic diversity and genetic originality of the population are maintained or recovered. It can be based either on pedigree data or on marker data, whereby the latter approach is recommended. It requires that this data is available for all selection candidates, or, at least from a large sample of selection candidates.
Even if the frequency of use of breeding animals is not regulated by the breeding organization, running the optimization still provides valuable information for a breeder, as the animals with highest optimum contributions are most valuable for a breeding program.
This vignette is organized as follows:
All evaluations using marker data are demonstrated at the example of cattle data included in the package. This multi-breed data has already been described in the companion vignette for basic marker-based evaluations.
Data frame Cattle includes the phenotypic information and has columns Indiv (individual IDs), Born (year of birth), Breed (breed name), BV (breeding values), and Sex (sexes).
library("optiSel")
data(Cattle)
head(Cattle)## Indiv Born Breed BV Sex
## 276000101676415 276000101676415 1991 Angler -1.0706066 male
## 276000108612636 276000108612636 1994 Angler -0.3362574 female
## 276000102372349 276000102372349 1986 Angler -2.0735649 female
## 276000102379430 276000102379430 1987 Angler 1.5968307 male
## 276000108826036 276000108826036 1994 Angler 1.0023969 male
## 276000111902076 276000111902076 1998 Angler -0.2426676 maleThe data frame contains information on the 4 breeds Angler, Fleckvieh, Holstein, Rotbunt. The “Angler” is an endangered German cattle breed, which had been upgraded with Red Holstein (also called “Rotbunt”). The Rotbunt cattle are a subpopulation of the “Holstein” breed. The “Fleckvieh” or Simmental breed is unrelated to the Angler. The Angler cattle are the selection candidates.
This small example data set contains only genotypes from the first parts of the first two chromosomes. Vector GTfiles defined below contains the names of the genotype files. There is one file for each chromosome. Data frame map contains the marker map and has columns Name (marker name), Chr (chromosome number), Position, Mb (position in Mega base pairs), and cM (position in centiMorgan):
data(map)
dir <- system.file("extdata", package="optiSel")
GTfiles <- file.path(dir, paste("Chr", unique(map$Chr), ".phased", sep=""))
head(map)## Name Chr Position cM Mb
## ARS-BFGL-NGS-16466 ARS-BFGL-NGS-16466 1 267940 0 0.267940
## ARS-BFGL-NGS-98142 ARS-BFGL-NGS-98142 1 471078 0 0.471078
## ARS-BFGL-NGS-114208 ARS-BFGL-NGS-114208 1 533815 0 0.533815
## ARS-BFGL-NGS-65067 ARS-BFGL-NGS-65067 1 883895 0 0.883895
## ARS-BFGL-BAC-32722 ARS-BFGL-BAC-32722 1 929617 0 0.929617
## ARS-BFGL-BAC-34682 ARS-BFGL-BAC-34682 1 950841 0 0.950841As an introductory example you may run a traditional OCS with marker based kinship matrices. All alternative approaches involve the same steps, so it is recommended to read this section even if you want to minimize inbreeding instead of maximizing genetic gain. The following steps are involved:
Compute the kinships that are to be managed and put them into a list with function kinlist. Below, the kinship is named sKin, which is a shorthand for segment based kinship.
Kin <- kinlist(sKin=segIBD(GTfiles, map))Define a data frame containing only the phenotypes of the selection candidates. Make sure that there is one column for each trait that should be improved.
phen <- Cattle[Cattle$Breed=="Angler",]Display the objective functions and constraints that are available for your data with function help.opticont:
help.opticont(Kin, phen)## Available objective functions:
## min.sKin
## min.BV
## max.BV
##
## Available constraints:
## ub.sKin
## lb.BV
## ub.BV
## eq.BV
## ub lb
##
## Attention: Probably not all these objective functions and
## constraints make sense in animal breedingFor numeric columns in data frame phen the possibility is provided to define an upper bound (prefix ub), a lower bound (prefix lb), an equality constraint (prefix eq), or to minimize (prefix min) or to maximize (prefix max) the weighted sum of the values, whereby the weights are the contributions of the selection candidates. If the column contains breeding values, then this is the expected mean breeding value in the offspring.
For each kinship named by function kinlist, the possibility is provided to define an upper bound for the expected mean value of the kinship in the offspring (prefix ub), or to minimize the value (prefix min).
Constraints ub and lb allow to define upper bounds and lower bounds for the contributions of the selection candidates.
Now choose the parameters you want to restrict and the parameters you want to optimize. For traditional OCs the objective is to maximize genetic gain with method max.BV, and to restrict the mean kinship in the offspring by defining constraint ub.sKin.
Create an empty list for the constraints:
con <- list()and put the constraints into the list. To define upper bounds for the contributions of the selection candidates you may define component ub as
con$ub <- c(M=NA, F=-1)In this case, ub is a named vector with two components, which define the upper bounds for the contributions of males and females. The value F=-1 means that females have equal contributions, so optimization will be done only for the males, and M=NA means that there is no upper bound for the contributions of males. Alternatively, different lower bounds and upper bounds could be defined for each selection candidate (see the help page of function opticont).
To define an upper bound for the mean kinship sKin in the offspring, put component ub.sKin into the list. In general, if an upper bound for a kinship \(K\) should be defined, it is recommended to derive the threshold value from the desired effective size \(N_e\) of the population by the formula \[ub.K=\overline{K}+(1-\overline{K})\Delta F,\] where \(\overline{K}\) is the mean kinship in the actual population, and \(\Delta F=\frac{1}{2 N_e}\). We will see below that the mean kinship in the actual population can be estimated as 0.0569. The critical effective size, i. e. the size below which the fitness of the population steadily decreases, depends on the population and is usually between 50 and 100. But there seems to be a consensus that 50-100 is a long-term viable effective size. To be on the safe side, an effective size of \(N_e=100\) should be envisaged (T H E Meuwissen 2009). Thus, the constraint is defined as
Ne <- 100
meanKin <- 0.0569
con$ub.sKin <- meanKin + (1-meanKin)*(1/(2*Ne))Now the optimum contributions of the selection candidates can be calculated:
maxBV <- opticont(method="max.BV", K=Kin, phen=phen, con=con, trace=FALSE)## Objective: maximizing mean BV of the offspring.
## Constraints:
## Mean kinship sKin in the offspring is not exceeding ub.sKin.
## Minimum contribution of males to offspring is defined.
## Minimum contribution of females to offspring is defined
## Number of offspring of males is not limited.
## (Thus, the maximum contribution per male to the offspring is 0.5).
## All females have equal contributions to the offspring.
## (Thus, no optimization is done for the females).
## The total genetic contribution of males to offspring is 0.5.
## The total genetic contribution of females to offspring is 0.5.
## Computing Cholesky decomposition for sKin ...finished
##
## Using solver cccp with parameters: trace=0, abstol=1e-05, feastol=1e-05, stepadj=0.9, maxiters=100, reltol=1e-06, beta=0.5Check if the results fulfill the constraints and look at the value of the objective function:
maxBV.s <- summary(maxBV)## Checking constraints:
## min(oc) >= 0 : TRUE
## total male cont = 0.5: TRUE
## total female cont = 0.5: TRUE
## females have equal cont: TRUE
## all male cont <= ub : TRUE
## mean sKin <= ub.sKin : TRUE
## maxBV.s$obj.fun## [1] 1.03991The results look OK. If they are not OK, then try to use another solver. The solver can be specified in parameter solver of function opticont. Available solvers are "alabama", "cccp", "cccp2", "csdp", and "slsqp". The default is "cccp". The solvers are described in the help page of function opticont. Alternatively you may use the same solver but with different tuning parameters. The available paramters are displayed if the function opticont is called (as shown above).
The optimum contributions of the selection candidates are in component parent:
Candidate <- maxBV$parent[, c("Indiv", "Sex", "oc")]
head(Candidate[rev(order(Candidate$oc)),])## Indiv Sex oc
## 276000121507437 276000121507437 male 0.06642407
## 276000121243787 276000121243787 male 0.06541830
## 276000120949468 276000120949468 male 0.06253429
## 276000120061822 276000120061822 male 0.06052825
## 276000110948577 276000110948577 male 0.05587340
## 276000113913566 276000113913566 male 0.04060774The optimum numbers of offspring can be obtained from the optimum contributions and the size N of the offspring population with function noffspring:
Candidate$nOff <- noffspring(Candidate, N=250)$nOff
head(Candidate[rev(order(Candidate$oc)),])## Indiv Sex oc nOff
## 276000121507437 276000121507437 male 0.06642407 33
## 276000121243787 276000121243787 male 0.06541830 33
## 276000120949468 276000120949468 male 0.06253429 31
## 276000120061822 276000120061822 male 0.06052825 30
## 276000110948577 276000110948577 male 0.05587340 28
## 276000113913566 276000113913566 male 0.04060774 20The objective of a breeding program depends on several factors. These are the intended use of the breed, the presence of historic bottlenecks, and the importance being placed on the maintenance of genetic originality. In most livestock breeds the focus is on increasing the economic merit, so the objective of the breeding program is to maximize genetic gain. In contrast, companion animals often suffer from historic bottlenecks due to an overuse of popular sires. Hence, in these breeds the objective is to minimize inbreeding. In endangered breeds, which get subsidies for conservation, the focus may be on increasing their conservation values by recovering the native genetic background or by increasing the diversity between breeds.
However, these are conflicting objectives: To maximize genetic gain, the animals with highest breeding values would be used for breeding, which may create a new bottleneck and contribute to inbreeding depression. Maximizing genetic gain would also favor the use of animals with high genetic contributions from commercial breeds because these animals often have the highest breeding values. But this would reduce the genetic originality of the breed. Minimizing inbreeding in the offspring favors the use of animals with high contributions from other breeds because they have low kinship with the population and it may require the use of outcross animals with breeding values below average.
Thus, focussing on only one aspect automatically worsens the other ones. This can be avoided by imposing constraints on the aspects that are not optimized.
In general, best practice is genotying all selection candidates to enable marker based evaluations. A breeding program based on marker information is more efficient than a breeding program based only on pedigree information, provided that the animals are genotyped for a sufficient number of markers. For several species, however, genotyping is still too expensive, so the breeding programs rely only on pedigree information.
Depending on what the objective of your breeding program is, you may continue reading at the appropriate section:
The required genotype file format, the marker map, the parameters minSNP, minL, unitL, unitP, and ubFreq, which are used for estimating the segment based kinship, the kinships at native haplotype segments, and the breed composition, have been described in the companion vignette for basic marker-based evaluations.
A matrix containing the segment based kinship between all pairs of individuals can be computed with function segIBD, whereas the kinships at native haplotype segments can be calculated from the results of function segIBDatN. Both kinships are computed below and combined into a single R-object with function kinlist. Below, the kinship at native haplotype segments is named sKinatN:
Kin <- kinlist(
sKin = segIBD(GTfiles, map, minSNP=20, minL=1.0),
sKinatN = segIBDatN(GTfiles, Cattle, map, thisBreed="Angler", ubFreq=0.01, minL=1.0)
)The breed composition of individuals can be estimated with function segBreedComp. The migrant contributions MC of the Angler cattle are added as an additional column to data frame Cattle.
wdir <- file.path(tempdir(), "HaplotypeEval")
wfile <- haplofreq(GTfiles, Cattle, map, thisBreed="Angler", minSNP=20, minL=1.0, w.dir=wdir)
Comp <- segBreedComp(wfile$match, map)
Cattle[rownames(Comp), "MC"] <- 1 - Comp$nativehead(Cattle[,-1])## Born Breed BV Sex MC
## 276000101676415 1991 Angler -1.0706066 male 0.4194310
## 276000108612636 1994 Angler -0.3362574 female 0.4312843
## 276000102372349 1986 Angler -2.0735649 female 0.2581902
## 276000102379430 1987 Angler 1.5968307 male 0.5954559
## 276000108826036 1994 Angler 1.0023969 male 0.7760017
## 276000111902076 1998 Angler -0.2426676 male 0.7541481There are two functions that can now be used to perform the optimization, which are opticont and opticont4mb. The latter is used especially if the aim is to decrease the average kinship in a multi-breed population. The parameters that can be constrained or optimized can be viewed with functions help.opticont
help.opticont(Kin, phen=Cattle)## Available objective functions:
## min.sKin min.segIBDandN min.sKinatN
## min.BV min.MC
## max.BV max.MC
##
## Available constraints:
## ub.sKin ub.segIBDandN ub.sKinatN
## lb.BV lb.MC
## ub.BV ub.MC
## eq.BV eq.MC
## ub lb
##
## Attention: Probably not all these objective functions and
## constraints make sense in animal breedingCompared to the introductory example the possibility to restrict or to minimize migrant contributions becomes available because column MC was added to data frame Cattle. Additionally, the possibility to minimize or to restrict the kinship at native segments sKinatN becomes available since this kinship was also defined in function kinlist.
The options available for function opticont4mb are displayed with help.opticont4mb:
help.opticont4mb(Kin, phen=Cattle)## Available objective functions:
## min.sKin.acrossBreeds min.sKin min.segIBDandN min.sKinatN
## min.BV min.MC
## max.BV max.MC
##
## Available constraints:
## ub.sKin.acrossBreeds ub.sKin ub.segIBDandN ub.sKinatN
## lb.BV lb.MC
## ub.BV ub.MC
## eq.BV eq.MC
## ub lb
##
## Attention: Probably not all these objective functions and
## constraints make sense in animal breedingHere, the additional possibility becomes available to minimize or to restrict the mean kinship sKin in a core set consisting of individuals from several breeds. The offspring of the selection candidates is included in the core set. This can be done by using method min.sKin.acrossBreeds in function opticont4m or by defining the constraint ub.sKin.acrossBreeds.
For defining appropriate threshold values for the constraints, the mean kinships meanKin and meanKinatN, the mean migrant contribution meanMC, and the mean breeding value in the actual population need to be known. They are equal to the respective values in a hypothetical offspring population that is created with no selection at all, meaning that all selection candidates are used for breeding, and all candidates of a particular sex have equal contributions. First we define a data frame containing only the phenotypes of the selection candidates:
phen <- Cattle[Cattle$Breed=="Angler",]The values for the actual population can be obtained as
eqCont <- summary(opticont(K=Kin, phen=phen, con="equal.cont"))
meanKin <- eqCont$sKin
meanKinatN <- eqCont$sKinatN
meanMC <- eqCont$meanMC
phen$BV <- phen$BV - eqCont$meanBV
meanBV <- 0eqCont[,c("sKin", "sKinatN", "meanMC")]## sKin sKinatN meanMC
## 0.05689674 0.06684541 0.6149141The breeding values are standardized to have mean 0 in the actual population.
Depending on what the objective of your breeding program is, you may continue reading at the appropriate section:
First we create a list of constraints:
con <- list(ub=c(M=NA, F=-1))
con$ub.sKin <- meanKin + (1-meanKin)*(1/(2*Ne))Again, equal contributions are assumed for the females and only the contributions of males are to be optimized. The upper bound for the mean segment based kinship was derived from the effective population size as explained above. Now the optimum contributions of the selection candidates can be calculated:
maxBV <- opticont(method="max.BV", K=Kin, phen=phen, con=con, trace=FALSE)
maxBV.s <- summary(maxBV)maxBV.s[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN")]## valid meanBV meanMC sKin sKinatN
## maxBV TRUE 1.000489 0.6399113 0.06161227 0.08166064The results are the same as in the introductory example (as expected). This approach may be apppropriate for a population without introgression, but for populations with historic introgression, the kinship at native alleles should be restricted as well in accordance with the desired effective size, and the migrant contributions should be restricted in order not to increase. Otherwise the genetic originality of the breed may get lost in the long term.
con$ub.sKinatN <- meanKinatN +(1-meanKinatN)*(1/(2*Ne))
con$ub.MC <- meanMC
maxBV2 <- opticont(method="max.BV", K=Kin, phen=phen, con=con, solver="slsqp")
maxBV2.s <- summary(maxBV2)For comparison, the summaries of both scenarios are combined into a single data frame with rbind:
Results <- rbind(maxBV.s, maxBV2.s)
Results[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN")]## valid meanBV meanMC sKin sKinatN
## maxBV TRUE 1.0004894 0.6399113 0.06161227 0.08166064
## maxBV2 TRUE 0.8813497 0.6149141 0.05912416 0.07151119Since migrant contributions and breeding values are positively correlated, the genetic gain decreases slightly when migrant contributions are constrained not to increase.
Minimizing inbreeding means to minimize the average kinship of the population in order to enable breeders to avoid inbreeding. This is the appropriate approach e.g. for companion animals suffering from a historic bottleneck. It can be done with or without accounting for breeding values. In the example below no breeding values are considered since accurate breeding values are not available for most of these breeds.
First we create a list of constraints:
con <- list(ub=c(M=NA, F=-1))Again, equal contributions are assumed for the females and only the contributions of males are to be optimized. The segment based kinship is not constrained in this example because it should be minimized.
minKin <- opticont(method="min.sKin", K=Kin, phen=phen, con=con, trace=FALSE)
minKin.s <- summary(minKin)minKin.s[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN")]## valid meanBV meanMC sKin sKinatN
## minKin TRUE -0.371969 0.5445139 0.04216327 0.05524461Minimizing kinship without constraining the mean breeding value decreases the mean breeding value in the offspring slightly because the individuals with high breeding values are related. For this breed, it also decreases the migrant contribution because individuals from other breeds were related.
While in livestock breeds the migrant contributions should be restricted in order to maintain the genetic originality of the breeds, in several companion breeds the opposite is true. Several companion breeds have high inbreeding coefficients and descend from only very few (e.g. 3) founders (Wellmann and Pfeiffer 2009), and purging seems to be not feasible. Hence, a sufficient genetic diversity of the population cannot be achieved in the population even if marker data is used to minimize inbreeding. For these breeds it may be appropriate to use unrelated individuals from a variety of other breeds in order to increase the genetic diversity. However, only a small contribution from other breeds is needed, so the migrant contributions should be restricted also for these breeds in order to preserve their genetic originality. Hence, the difference between a breed with high diversity and a breed with low diversity suffering from inbreeding depression is, that the optimum value for the migrant contribution is larger than 0 for the latter.
For such a breed it is advisable to allow the use of individuals from other breeds but to restrict the admissible mean contribution from other breeds in the population. The mean kinship at native alleles should be restricted as well to require only a small amount of introgression:
con$ub.MC <- 0.95*meanMC
con$ub.sKinatN <- meanKinatN +(1-meanKinatN)*(1/(2*Ne))
minKin2 <- opticont(method="min.sKin", K=Kin, phen=phen, con=con, solver="slsqp", trace=FALSE)
minKin2.s <- summary(minKin2)For comparison, the summaries of both scenarios are combined into a single data frame with rbind:
Results <- rbind(minKin.s, minKin2.s)
Results[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN")]## valid meanBV meanMC sKin sKinatN
## minKin TRUE -0.3719690 0.5445139 0.04216327 0.05524461
## minKin2 TRUE -0.3719214 0.5444554 0.04216174 0.05523923For endangered breeds the priority of a breeding program could be to recover the original genetic background by minimizing migrant contributions. However, since the individuals with smallest migrant contributions are related, this may considerably increase the inbreeding coefficients if the diversity at native alleles is not preserved. Hence, constraints are defined below not only for the segment based kinship but also for the kinship at native segments in accordance with the desired effective size:
phen <- Cattle[Cattle$Breed=="Angler",]
con <- list(ub=c(M=NA, F=-1))
con$ub.sKin <- meanKin + (1-meanKin)*(1/(2*Ne))
con$ub.sKinatN <- meanKinatN + (1-meanKinatN)*(1/(2*Ne))
minMC <- opticont(method="min.MC", K=Kin, phen=phen, con=con, solver="slsqp")
minMC.s <- summary(minMC)minMC.s[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN")]## valid meanBV meanMC sKin sKinatN
## minMC TRUE -0.5564253 0.480897 0.04937383 0.07151119For this breed, minimizing migrant contributions results in negative genetic gain because migrant contributions and breeding values are positively correlated. This can be avoided by adding an additional constraint for the breeding values:
con$lb.BV <- 0
minMC2 <- opticont(method="min.MC", K=Kin, phen=phen, con=con, solver="cccp", trace=FALSE)
minMC2.s <- summary(minMC2)For comparison, the summaries of both scenarios are combined into a single data frame with rbind:
Results <- rbind(minMC.s, minMC2.s)
Results[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN")]## valid meanBV meanMC sKin sKinatN
## minMC TRUE -5.564253e-01 0.4808970 0.04937383 0.07151119
## minMC2 TRUE 6.115291e-07 0.4983187 0.04934570 0.07132758While removing introgressed genetic material from the population is one possibility to increase the conservation value of an endangered breed, an alternative approach is to increase the genetic distance between the endangered breed and commercial breeds. In this case we do not care about whether alleles are native or not. We just want to accumulate haplotype segments which are rare in commercial breeds. This can be done with a core set approach.
In the core set approach, a hypothetical subdivided population is considered, consisting of individuals from various breeds. This population is called the core set. The individuals from the breed of interest are the selection candidates. The contributions of each breed to the core set are such that the genetic diversity of the core set is maximized. The parameter to be minimized is the mean kinship of individuals from the core set in the next generation. Thereby, it is assumed that the contributions of the selection candidates from the breed of interest are optimized, whereas individuals from all other breeds have equal contributions.
If the contributions of the selection candidates minimize the mean kinship in the core set, then they maximize the genetic diversity of the core set. This could be achieved by increasing the gentic diversity within the breed or by increasing the genetic distance between the breed of interest and the other breeds.
First, the contributions of the breeds to the core set are calculated with function opticomp. A lower bound is specified for the breed of interest:
CoreSet <- opticomp(Kin$sKin, Cattle$Breed, lb=c(Angler=0.1))
CoreSet$bc## Angler Fleckvieh Holstein Rotbunt
## 0.47908531 0.42425265 0.04434691 0.05231513Second, the constraints are defined:
con <- list(ub=c(M=NA, F=-1))
con$ub.sKin <- meanKin + (1-meanKin)*(1/(2*Ne))Equal contributions are assumed for the females and only the contributions of males are to be optimized. The upper bound for the mean segment based kindship was derived from the effective population size as explained above. Now the optimum contributions of the selection candidates can be calculated with fumction opticont4mb:
minKin4mb <- opticont4mb("min.sKin.acrossBreeds", Kin, phen=Cattle, CoreSet$bc,
thisBreed="Angler", con=con, trace=FALSE)
minKin4mb.s <- summary(minKin4mb)minKin4mb.s[,c("valid", "meanBV", "meanMC", "sKin", "sKinatN", "sKin.acrossBreeds")]## valid meanBV meanMC sKin sKinatN
## minKin4mb TRUE -0.2754909 0.5364332 0.04294231 0.05805911
## sKin.acrossBreeds
## minKin4mb 0.03014493Note that parameter phen of function opticont4mb is a data frame containing individuals from all genotyped breeds. In contrast, parameter phen of function opticont contains only the selection candidates.
All evaluations using pedigree data are demonstrated at the example of the Hinterwald cattle. A pedigree is contained in the package. The pedigree and the functions dealing with pedigree data have already been described in the companion vignette for basic pedigree-based evaluations.
The pedigree completeness is an important factor to get reliable results. If an animal has many missing ancestors, then it would falsely considered to be unrelated to other animals, so it will falsely obtain high optimum contributions. There are several approaches to overcome this problem:
Calculate the pedigree completeness for all selection candidates and exclude individuals with a small number of equivalent complete generations from the evaluations. The number of equivalent complete generations can be computed with function summary.
Classify the breed of founders born after some fixed date as unknown, and restrict the genetic contribution from these founders in the offspring. The breed names can be classified by using appropriate values for parameters lastNative and thisBreed in function prePed.
Classify the breed of founders born after some fixed date as unknown, so that these founders are considered non-native, and restrict or minimize the kinship at native alleles (in addition to the classical pedigree based kinship).
Of course, all 3 approaches can be followed simultaneously. First, we prepare the pedigree and classify the breed of founders born after 1970 to be unknown:
data("PedigWithErrors")
Pedig <- prePed(PedigWithErrors, thisBreed="Hinterwaelder", lastNative=1970)head(Pedig)## Indiv Sire Dam Sex Breed Born
## S276000890888469 S276000890888469 <NA> <NA> male unknown NA
## S276000891160479 S276000891160479 <NA> <NA> male unknown NA
## S276000811209491 S276000811209491 <NA> <NA> male unknown NA
## S276000811063904 S276000811063904 <NA> <NA> male unknown NA
## S276000892147965 S276000892147965 <NA> <NA> male unknown NA
## S276000891895524 S276000891895524 <NA> <NA> male unknown NAWe define the individuals included in data.frame Phen to be selection candidates if their number of equivalent complete generations is at least 5.0. These are the individuals contained in vector keep. In a real application the individuals would be used as selection candidates that could become parents of the forthcomming birth cohorts.
data("Phen")
Summary <- summary(Pedig, keep=Pedig$Indiv %in% Phen$Indiv)
keep <- Summary[Summary$equiGen>=3.0, "Indiv"]
table(Pedig[keep, "Sex"])##
## female male
## 47 98A matrix containing the pedigree based kinship between all pairs of individuals can be computed with function pedIBD. It is half the additive relationship matrix. The pedigree based kinship at native alleles can be calculated from the results of function pedIBDatN. Both kinships are computed below and combined into a single R-object with function kinlist. Below, the pedigree based kinship is named pKin, and the kinship at native alleles is named pKinatN:
Kin <- kinlist(
pKin = pedIBD(Pedig, keep.only=keep),
pKinatN = pedIBDatN(Pedig, thisBreed="Hinterwaelder", keep.only=keep)
)## Number of Migrant Founders: 159
## Number of Native Founders: 150
## Individuals in Pedigree : 1521
## Mean kinship at native alleles: 0.078The breed composition of individuals can be estimated with function pedBreedComp. The migrant contributions MC of the Angler cattle are added as an additional column to the pedigree.
cont <- pedBreedComp(Pedig, thisBreed="Hinterwaelder")
Pedig$MC <- 1-cont$native
head(cont[keep, 2:6])## native unknown unbek0 Fleckvieh Vorderwaelder
## 276000812496744 0.7360840 0.062500 0.024658203 0.10644531 0.07031250
## 276000891862786 0.6164551 0.187500 0.022705078 0.09130859 0.08203125
## 276000812202159 0.4367676 0.265625 0.014160156 0.08032227 0.20312500
## 276000812749837 0.5534668 0.312500 0.013427734 0.05810547 0.06250000
## 276000891618444 0.2949219 0.515625 0.003173828 0.04565430 0.14062500
## 276000812922523 0.3649902 0.437500 0.022460938 0.06567383 0.10937500Below, the columns from the pedigree are added to data frame Phen. Hence, it contains the individual IDs in Colmumn 1 (Indiv), sexes in Column 2 (Sex), breed names (Breed), years of birth (Born), breeding values (BV), and the migrant contributions (MC) of the selection candidates. The breeding values are simulated such that breeding values and migrant contributions are positively correlated. This mimics historic introgression from a high-yielding commercial breed:
Phen <- merge(Pedig, Phen[,c("Indiv", "BV")], by="Indiv")
Phen <- Phen[Phen$Indiv %in% keep, c("Indiv", "Sex","Breed", "Born", "BV", "MC")]
Phen$BV <- Phen$BV - mean(Phen$BV)
head(Phen)## Indiv Sex Breed Born BV MC
## 1 276000810958027 male Hinterwaelder 2003 1.66612826 0.6257324
## 2 276000811082118 male Hinterwaelder 2003 -1.35282365 0.5294189
## 3 276000811287745 female Hinterwaelder 2001 -1.23463901 0.4195862
## 4 276000811597070 male Hinterwaelder 2001 1.06713987 0.6991882
## 5 276000811597110 male Hinterwaelder 2003 0.08216756 0.4387512
## 6 276000811597136 female Hinterwaelder 2002 1.63222142 0.7654114The parameters that can be constrained or optimized can be viewed with function help.opticont
help.opticont(Kin, Phen)## Available objective functions:
## min.pKin min.pedIBDandN min.pKinatN
## min.BV min.MC
## max.BV max.MC
##
## Available constraints:
## ub.pKin ub.pedIBDandN ub.pKinatN
## lb.BV lb.MC
## ub.BV ub.MC
## eq.BV eq.MC
## ub lb
##
## Attention: Probably not all these objective functions and
## constraints make sense in animal breedingCompared to the introductory example the possibility to restrict or to minimize migrant contributions becomes available because column MC is now included in data frame Phen. Additionally, there is the possibility to minimize or to restrict the kinship at native alleles pKinatN and the pedigree based kinship pKin.
For defining appropriate threshold values for the constraints, the mean kinships meanKin and meanKinatN, the mean migrant contribution meanMC, and the mean breeding value in the actual population need to be known. They are equal to the respective values in a hypothetical offspring population that is created with no selection at all, meaning that all selection candidates are used for breeding, and all candidates of a particular sex have equal contributions. Thus, the values for the actual population can be obtained as
eqCont <- summary(opticont(K=Kin, phen=Phen, con="equal.cont"))
meanKin <- eqCont$pKin
meanKinatN <- eqCont$pKinatN
meanMC <- eqCont$meanMC
Phen$BV <- Phen$BV - eqCont$meanBV
meanBV <- 0eqCont[,c("pKin", "pKinatN", "meanMC")]## pKin pKinatN meanMC
## 0.03456986 0.07689685 0.4707445Depending on what the objective of your breeding program is, you may continue reading at the appropriate section:
This is the traditional approach proposed by T. H. E. Meuwissen (1997). First we create a list of constraints:
con <- list(ub=c(M=NA, F=-1))
con$ub.pKin <- meanKin + (1-meanKin)*(1/(2*Ne))Here, equal contributions are assumed for the females and only the contributions of males are to be optimized. The upper bound for the mean segment based kinship was derived from the effective population size as explained above. Now the optimum contributions of the selection candidates can be calculated:
maxBV <- opticont(method="max.BV", K=Kin, phen=Phen, con=con, trace=FALSE)
maxBV.s <- summary(maxBV)maxBV.s[,c("valid", "meanBV", "meanMC", "pKin", "pKinatN")]## valid meanBV meanMC pKin pKinatN
## maxBV TRUE 0.8069901 0.5410158 0.03939701 0.09662858This approach may be apppropriate for a population without introgression and complete pedigrees, but for populations with historic introgression, the kinship at native alleles should be restricted as well in accordance with the desired effective size, and the migrant contributions should be restricted in order not to increase. Otherwise the genetic originality of the breed may get lost in the long term.
con$ub.pKinatN <- meanKinatN +(1-meanKinatN)*(1/(2*Ne))
con$ub.MC <- meanMC
maxBV2 <- opticont(method="max.BV", K=Kin, phen=Phen, con=con, solver="slsqp")
maxBV2.s <- summary(maxBV2)For comparison, the summaries of both scenarios are combined into a single data frame with rbind:
Results <- rbind(maxBV.s, maxBV2.s)
Results[,c("valid", "meanBV", "meanMC", "pKin", "pKinatN")]## valid meanBV meanMC pKin pKinatN
## maxBV TRUE 0.8069901 0.5410158 0.03939701 0.09662858
## maxBV2 TRUE 0.6308613 0.4707445 0.03798457 0.08151239Thus, genetic gain in Method 2 is only slightly below the genetic gain in Method 1, but the migrant contributions do not increase and the kinship at native alleles increases at a lower rate.
Minimizing inbreeding means to minimize the average kinship of the population in order to enable breeders to avoid inbreeding. This is the appropriate approach e.g. for companion animals suffering from a historic bottleneck. It can be done with or without accounting for breeding values. In the example below no breeding values are considered since accurate breeding values are not available for most of these breeds.
First we create a list of constraints:
con <- list(ub=c(M=NA, F=-1))Again, equal contributions are assumed for the females and only the contributions of males are to be optimized. The segment based kinship is not constrained in this example because it should be minimized.
minKin <- opticont(method="min.pKin", K=Kin, phen=Phen, con=con, trace=FALSE)
minKin.s <- summary(minKin)minKin.s[,c("valid", "meanBV", "meanMC", "pKin", "pKinatN")]## valid meanBV meanMC pKin pKinatN
## minKin TRUE 0.2612448 0.5294628 0.02695391 0.07148733The approach shown above has the disadvantage that kinships between individuals are less reliable if ancestors are missing in the pedigree. The alternative approach, shown below, is to minimize the kinship at native alleles and to restrict pedigree based kinship.
While in livestock breeds the migrant contributions should be diminished in order to maintain the genetic originality of the breeds, in several companion breeds the opposite is true. Several companion breeds have high inbreeding coefficients and descend from only very few (e.g. 3) founders. Hence, a sufficient genetic diversity cannot be achieved in the population. For these breeds it may be appropriate to use unrelated individuals from a variety of other breeds in order to increase the genetic diversity. However, only a small contribution from other breeds is needed, so the migrant contributions should be restricted also for these breeds in order to preserve their genetic originality. The difference between a breed with high diversity and a breed with low diversity suffering from inbreeding depression is, that the optimum value for the migrant contribution is larger than 0 for the latter. For such a breed it is advisable to allow the use of individuals from other breeds but to restrict the admissible mean contribution from other breeds.
In summary, the alternative approach is to minimize the kinship at native alleles and to restrict pedigree based kinship and migrant contributions:
con <- list(ub=c(M=NA, F=-1))
con$ub.MC <- 0.95*meanMC
con$ub.pKin <- meanKin + (1-meanKin)*(1/(2*Ne))
minKin2 <- opticont(method="min.pKinatN", K=Kin, phen=Phen, con=con, solver="slsqp")
minKin2.s <- summary(minKin2)For comparison, the summaries of both scenarios are combined into a single data frame with rbind:
Results <- rbind(minKin.s, minKin2.s)
Results[,c("valid", "meanBV", "meanMC", "pKin", "pKinatN")]## valid meanBV meanMC pKin pKinatN
## minKin TRUE 0.26124483 0.5294628 0.02695391 0.07148733
## minKin2 TRUE -0.02294647 0.4472072 0.03195152 0.06735677The pedigree based kinship is slightly higher in the second approach, but the kinship at native alleles is lower. Since pedigree based kinships are less reliable due to missing ancestors in the pedigree, the second approach is recommended. However, the use of pedigree data has the disadvantage that only the expected kinships can be minimized. The expected kinships deviate from the realized kinships due to mendelian segregation. Hence, for breeds with serious inbreeding problems it is recommended to genotype the selection candidates and to perform marker-based optimum contribution selection.
For endangered breeds the priority of a breeding program could be to recover the original genetic background by minimizing migrant contributions. However, since the individuals with smallest migrant contributions are related, this may considerably increase the inbreeding coefficients if the diversity at native alleles is not preserved. Hence, constraints are defined below not only for the pedigree based kinship, but also for the kinship at native alleles in accordance with the desired effective size:
con <- list(ub=c(M=NA, F=-1))
con$ub.pKin <- meanKin + (1-meanKin)*(1/(2*Ne))
con$ub.pKinatN <- meanKinatN + (1-meanKinatN)*(1/(2*Ne))
minMC <- opticont(method="min.MC", K=Kin, phen=Phen, con=con, trace=FALSE)
minMC.s <- summary(minMC)minMC.s[,c("valid", "meanBV", "meanMC", "pKin", "pKinatN")]## valid meanBV meanMC pKin pKinatN
## minMC TRUE -0.2401772 0.4045624 0.03939718 0.07656198For some breeds, migrant contributions and breeding values are positively correlated, so minimizing migrant contributions results in negative genetic. This can be avoided by adding an additional constraint for the breeding values:
con$lb.BV <- 0
minMC2 <- opticont(method="min.MC", K=Kin, phen=Phen, con=con, trace=FALSE)
minMC2.s <- summary(minMC2)For comparison, the summaries of both scenarios are combined into a single data frame with rbind:
Results <- rbind(minMC.s, minMC2.s)
Results[,c("valid", "meanBV", "meanMC", "pKin", "pKinatN")]## valid meanBV meanMC pKin pKinatN
## minMC TRUE -2.401772e-01 0.4045624 0.03939718 0.07656198
## minMC2 TRUE 1.690487e-07 0.4083818 0.03939705 0.07730697Meuwissen, T H E. 2009. “Genetic Management of Small Populations: A Review.” Acta Agriculturae Scand Section A 59: 71–79.
Meuwissen, T. H. E. 1997. “Maximising the Response of Selection with a Predefined Rate of Inbreeding.” J. Animal Sci 75: 934–40.
Wellmann, R., and I. Pfeiffer. 2009. “Pedigree Analysis for Conservation of Genetic Diversity and Purging.” Genetical Research (Camb) 91 (34).