1 Introduction

The purpose of this vignette is to demonstrate how to utilize SimDesign in the context of distributing many jobs across independent computing environments, such as high-performance computing (HPC) clusters, in a way that allows for reproducibility of the simulation conditions, resubmission of jobs in case of incomplete collection of results within a specified HPC execution time budget, and to ensure that random number generation across the entire simulation (and subsequent resubmissions, if required) are properly manged throughout given the batch nature of the job. The following text and examples are primarily for managing larger simulations, often with thousands of replications over many simulation conditions (i.e., rows in the defined design object) which generally require non-trivial amounts of computing resources to execute (hence, the need for super-computing resources and job schedulers like Slurm, TORQUE, MAUI, among others).

For information about Slurm’s Job Array support in particular, which this vignette uses as an example, see https://slurm.schedmd.com/job_array.html

2 Standard setup on HPC cluster

To start, the structure of the simulation code used later on to distribute the jobs to the HPC scheduler is effectively the same as the usual generate-analyse-summarise workflow described in runSimulation(), with a few organizational exceptions. As such, this is always a good place to start when designing, testing, and debugging a simulation experiment before submitting to HPC clusters.

IMPORTANT: Only after the vast majority of the bugs and coding logic have been work out should you consider moving on to the next step involving HPC clusters. If your code is not well vetted in this step then any later jobs evaluated on the HPC cluster will be a waste of time and resources (garbage-in, garbage-out).

2.0.1 Example

Suppose the following simulation was to be evaluated, though for time constraint reasons would not be possible to execute on a single computer (or a smaller network of computers) and therefore should be submitted to an HPC cluster.

The following script (hypothetically written in a file called SimDesign_simulation.R) contains a simulation experiment whose instructions are to be submitted to the Slurm scheduler. To do so, the sbatch utility is used along with the set of instructions specifying the type of hardware required in the file slurmInstructions.slurm. In the R side of the simulation, the defined code must grab all available cores (minus 1) that are detectable via parallelly::availableCores(), which occurs automatically when using runSimulation(..., parallel=TRUE).

# SimDesign::SimFunctions()
library(SimDesign)

Design <- createDesign(N = c(10, 20, 30))

Generate <- function(condition, fixed_objects) {
    dat <- with(condition, rnorm(N, 10, 5)) # distributed N(10, 5)
    dat
}

Analyse <- function(condition, dat, fixed_objects) {
    ret <- c(mean=mean(dat), median=median(dat)) # mean/median of sample data
    ret
}

Summarise <- function(condition, results, fixed_objects){
    colMeans(results)
}
# standard setup (not ideal for HPC clusters as parallelization
#  occurs within the design conditions, not across)
res <- runSimulation(design=Design, replications=10000, generate=Generate,
                     analyse=Analyse, summarise=Summarise, parallel=TRUE, 
                     filename='mysim')

In the standard runSimulation(..., parallel=TRUE) setup the 10,000 replications would be distributed to the available computing cores and evaluated independently across the three row conditions in the design object. However, this process is only executed in sequence: design[1, ] is evaluated first and, only after the 10,000 replications are collected, design[2, ] is evaluated until it is complete, then design[3, ], and so on.

As well, in order for this approach to be at all optimal the HPC cluster must assign a job containing a very large number of resources; specifically, higher RAM and CPUs. To demonstrate, in the following slurmInstructions.slurm file a larger number of CPUs are requested when allocating the computational structure/cluster associated with this job, as well as larger amounts of RAM.

#!/bin/bash
#SBATCH --job-name="My simulation (multiple CPUs)"
#SBATCH --mail-type=ALL
#SBATCH --mail-user=somewhere@out.there
#SBATCH --output=/dev/null    ## (optional) delete .out files
#SBATCH --time=12:00:00       ## HH:MM:SS
#SBATCH --cpus-per-task=96    ## Build a computer with 96 cores
#SBATCH --mem-per-cpu=2G      ## Build a computer with 192GB of RAM 

module load r
Rscript --vanilla SimDesign_simulation.R

This job request a computing cluster be built with 192 GB of RAM with 96 CPUs (across whatever computing nodes are available; likely 2 or more), which the SimDesign_simulation.R is evaluated in, and is submitted to the scheduler via sbatch slurmInstructions.slurm.

2.0.2 Limitations

While generally effective at distributing the computational load, there are a few limitations of the above approach:

  1. For simulations with varying execution times this will create a great deal of resource waste.
    • Due to the row-evaluation nature of the design conditions, computing cores will at some point sit idle while waiting for the remaining experiments to complete their job. This occurs for each row in the design input (i.e., per simulation condition)
    • As such, simulation experiments with many conditions to evaluate will suffer most due to the rolling overhead, resulting in wasted resource management (not kind to other users of the HPC cluster) and ultimately results in jobs that take longer to complete
  2. Designers must first estimate the number of total amount of CPUs/RAM/time required, while being as conservative as possible
    • Problematic because fewer resource jobs are given higher priority in the scheduler, and because you may be taking resources away from other researchers if the cores sit idle
  3. Parallel distribution across the allocated resources (e.g., across two nodes, both with 48 cores) incurs some overhead that grows as a function of the size of the defined cluster
    • Using a 96 CPU cluster will not result in a 96x speedup of a 1 CPU job. In fact, the larger the allocated cluster, the worse the performance efficiency
  4. The scheduler must wait until all resources (e.g., RAM and CPUs) simultaneously become available to allocate the requested specifications, which can take a good amount of time to allocate if the resources requested are excessively high (hence, become low priority on the scheduler)
    • If you request 96 CPUs with 192 GB of RAM then this will take considerably longer to allocate compared to requesting 96 independent computing arrays with 1 CPU and 2 GB of RAM (the latter approach is described in the next section)
    • In concert with point 3), this results in jobs that a) take longer to get started as they will sit longer in the queue and b) may not distribute the load efficiently enough, thereby resulting in larger wall time then should have been necessary
  5. Submitting independent multiple batches to the cluster makes it more difficult to guarantee the quality of the random numbers
    • Setting the seed for each condition ensure that within each design condition the random numbers are high quality, however there is no guarantee that repeated use of set.seed() will result in high-quality random numbers (see next section for example)
    • Hence, repeated job submissions of this type, even with unique seeds per condition, may not generate high quality numbers if repeated too many times (alternative is to isolate each design row and submit each row as a unique job, which is demonstrated near the end of this vignette)
  6. Finally, and perhaps most problematic in simulation experiment applications, schedulers frequently cap the maximum number of resources that can be requested (e.g., 256 GB of RAM, 200 CPUs), which limits the application of large RAM and CPU jobs
    • Note that to avoid wasting time by swapping/paging, schedulers will never allocate jobs whose memory requirements exceed the amount of available memory

To address these and other computational inefficiencies/wasted resources, one can instead switch from the cluster-based approach above to an array distribution approach, discussed in the next section.


3 Array jobs

For HPC computing it is often more optimal to distribute both replications and conditions simultaneously to unique computing nodes (termed arrays) to effectively break the problem in several mini-batches (e.g., split the simulation into 1000+ independent pieces, and collect the results later). As such, the above design object and runSimulation() structure above does not readily lend itself to optimal distribution for the array scheduler to manage. Nevertheless, the core components are still useful for initial code design, testing, and debugging, and therefore serve as a necessary first step when writing simulation experiment code prior to submitting to an HPC cluster.

After defining and testing your simulation to ensure that it works as expected, it now comes the time to setup the components required for organizing the HPC cluster submission using the runArraySimulation() function.

3.1 Converting runSimulation() workflow to one for runArraySimulation()

The job of runArraySimulation() is to utilize the relevant information defined in the .sh or .slurm script. This is done by extracting information provided by the scheduler (specifically, via an arrayID), which is used to select specific subsets of the design rows. However, unlike runSimulation() the function runArraySimulation() has been designed to control important information pertaining to .Random.seeds and other relevant distribution information that allow for the rows in the design object itself to contain repeated experimental condition information. This allows both the design rows and replication information to be optimally distributed to the HPC cluster.

The following example presents the essential modifications required to move from a single runSimulation() workflow to a batch workflow suitable for runArraySimulation() and Slurm scheduler.

3.2 Expand the standard simulation design object for each array ID

Suppose that 300 computing cores were independently available on the HPC cluster, though the availability of these cores only trickle in as a function of the schedulers decided availability. In this case, the strategy would be to split up the 3 * 10000 = 30000 condition-by-replications experiments across the gradually available resources, where jobs are evaluated in parallel and at different times.

Given the above specifications, you may decide that each of the 300 computing nodes requested to the scheduler should evaluate exactly 100 replications each (nrow(design) * 10000 / 300 = 100). In this case, expandDesign() is used to repeat each row condition 100 times, creating a new expanded design object with 300 rows instead of 3. To accommodate for the new rows, the associated replications should now be defined according to how many replications should be used within each of these to-be-distributed conditions, which need not be equal (see below).

rc <- 100   # number of times the design row was repeated
Design300 <- expandDesign(Design, repeat_conditions = rc)
Design300
## # A tibble: 300 × 1
##        N
##    <dbl>
##  1    10
##  2    10
##  3    10
##  4    10
##  5    10
##  6    10
##  7    10
##  8    10
##  9    10
## 10    10
## # ℹ 290 more rows
# target replication number for each condition
rep_target <- 10000

# replications per row in Design300
replications <- rep(rep_target  / rc, nrow(Design300))

The above approach assumes that each design condition is equally balanced in terms of computing time and resources, though if this is not the case (e.g., the last condition contains notably higher computing times than the first two conditions) then repeat_conditions can be specified as a vector instead, such as repeat_conditions = c(100, 100, 1000), which for the latter portion would be associated with a 10 replications per distributed node instead of 100.

rc <- c(100, 100, 1000)
DesignUnbalanced <- expandDesign(Design, repeat_conditions = rc)
DesignUnbalanced
## # A tibble: 1,200 × 1
##        N
##    <dbl>
##  1    10
##  2    10
##  3    10
##  4    10
##  5    10
##  6    10
##  7    10
##  8    10
##  9    10
## 10    10
## # ℹ 1,190 more rows
rep_target <- 10000
replicationsUnbalanced <- rep(rep_target / rc, times = rc)
head(replicationsUnbalanced)
## [1] 100 100 100 100 100 100
table(replicationsUnbalanced)
## replicationsUnbalanced
##   10  100 
## 1000  200

Regardless of whether the expanded design is balanced or unbalanced each row in the resulting expanded design object will be assigned to a unique computing array node, identified according to the Slurm assigned array ID.

3.3 Construct and record proper random seeds

In principle, the expanded Design300 object above could be passed as runSimulation(Design300, replications=100, ...) to evaluate each of the repeated conditions, where each row is now replicated only 100 times. However, there is now an issue with respect to the random seed management in that use of functions such as set.seed() and friends are no longer viable. This is because repeated use of set.seed() does not itself guarantee independent high-quality random numbers between different instances. For example,

set.seed(0)
x <- runif(100)
set.seed(1)
y <- runif(100)

plot(x, y)           ## seemingly independent

plot(x[-1], y[-100]) ## subsets perfectly correlated

This issue is generally not problem in the standard runSimulation() approach as within each design condition high quality random numbers are used by default, and any potentially repeated number sequences across the conditions are highly unlikely to affect the quality of the overall simulation experiment (the conditions themselves typically generate and manage random numbers in different ways due to the varying simulation factors, such as sample sizes, variance conditions, fitted models, number of variables, type of probability distributions use, and so on). However, in the expandDesign() setup the likelihood of witnessing correlated/redundant random samples increases very quickly, which is particularly problematic within each distributed replication set; hence, special care must be taken to ensure that proper seeds are distributed to each job array.

Fortunately, seeds are easy to manage with the genSeeds() function using a two-step approach, which is internally managed by runArraySimulation() by supplying an initial seed (iseed) value and the associated array ID (arrayID). Doing so will utilize L’Ecuyer’s (1999) method, which constructs sequentially computed .Random.seed states to ensure independence across all replications and conditions. Note that iseed must constant across all job arrays, so make sure to define iseed once and only once!

# genSeeds()   # do this once on the main node/home computer and store the number!
iseed <- 1276149341

As discussed in the FAQ section at the bottom, this associated value will also allow for generation of new .Random.seed elements if (or when) a second or third set of simulation jobs should be submitted to the HPC cluster at a later time but must also generate simulated data that is independent from the initial submission(s).

3.4 Extract array ID information from the .slurm script

When submitting to the HPC cluster you’ll need to include information about how the scheduler should distribute the simulation experiment to the workers. In Slurm systems, you may have a script such as the following, stored into a suitable .slurm file:

#!/bin/bash
#SBATCH --job-name="My simulation (array jobs, distributing conditions + replications)"
#SBATCH --mail-type=ALL
#SBATCH --mail-user=somewhere@out.there
#SBATCH --output=/dev/null    ## (optional) delete .out files
#SBATCH --time=12:00:00       ## HH:MM:SS
#SBATCH --mem-per-cpu=4G      ## 4GB of RAM per cpu
#SBATCH --cpus-per-task=1
#SBATCH --array=1-300         ## Slurm schedulers often allow up to 10,000 arrays

module load r
Rscript --vanilla mySimDesignScript.R

For reference later, label this file simulation.slurm as this is the file that must be submitted to the scheduler when it’s time.

The top part of this .slurm file provides the BASH instructions for the Slurm scheduler via the #SBATCH statements. In this case, how many array jobs to queue (1 through 300), how much memory to use per job (2GB), time limits (12 hours), and more; see here for SBATCH details.

The most important input to focus on in this context is #SBATCH –array=1-300 as this is what is used by the Slurm scheduler to assign a unique ID to each array job. What the scheduler does is take the defined mySimDesignScript.R script and send this to 300 independent resources (each with 1 CPU and 4GB of RAM, in this case), where the independent jobs are assigned a unique array ID number within the --array=1-300 range (e.g., distribution to the first computing resource would be assigned arrayID=1, the second resource arrayID=2, and so on). In the runArraySimulation() function this is used to subset the Design300 object by row; hence, the array range must correspond to the row identifiers in the design object for proper subsetting!

Collecting this single number assigned by the Slurm scheduler is also easy. Just include

# get assigned array ID (default uses type = 'slurm')
arrayID <- getArrayID()

to obtain the associated array ID, which is this example will be a single integer value between 1 and 300. This value is used in the final execution step via runArraySimulation(..., arrayID=arrayID), which we finally turn to.

3.5 Organize information for runArraySimulation()

With all the prerequisite steps in place we’re finally ready to pass all information to runArraySimulation(), which is effectively a wrapper to runSimulation() that suppresses verbose outputs, takes subsets of the Design300 object given the supplied arrayID (and other objects, such as replications, seeds, etc), forces evaluation on a single CPU (hence, #SBATCH --cpus-per-task=1 should be used by default, unless there is further parallelization to occur within the replications, such as via OpenMP), manages the random number generation seeds in a tractable way, and saves the SimDesign results to file names based on the filename argument with suffixes associated with the arrayID (e.g., filename='mysim' will save the files mysim-1.rds for array 1, mysim-2.rds for array 2, …, mysim-300.rds for array 300).

# run the simulation on subset based on arrayID subset information
runArraySimulation(design=Design300, replications=replications,
                   generate=Generate, analyse=Analyse,
                   summarise=Summarise, iseed=iseed,
                   arrayID=arrayID, filename='mysim')

And that’s it!

The above will store all the mysim-#.rds files in the directory where the job was submitted, which is somewhat on the messy side, so you may also want to specify a directory name to store the simulation files to. Hence, on the main (i.e., landing) location associated with your ssh account create a directory, using something like mkdir mysimfiles (or in R, dir.create('mysimfiles')) in the location where your .R and .slurm files are stored. Then the following can be used to store all 300 collected .rds files, making use of the dirname argument.

# run the simulation on subset based on arrayID subset information
runArraySimulation(design=Design300, replications=replications,
                   generate=Generate, analyse=Analyse,
                   summarise=Summarise, iseed=iseed, arrayID=arrayID, 
                   dirname='mysimfiles', filename='mysim')

Regardless, the hard part is done here, though other information could be included by way of the control list input if necessary, such as including explicit time/resource limits in the R executions within array jobs themselves (see the FAQ section for further information).

3.6 Putting it all together

Below is the complete submission script collecting everything that was presented above. This assumes that

  • The .R file with the simulation code is stored in the file mySimDesignScript.R,
  • A suitable Slurm instruction file has been created in the file simulation.slurm, which points to mySimDesignScript.R and includes the relevant R modules, and
  • A directory called mysimfiles/ has been created for storing the files on the computer used to submit the array job
library(SimDesign)

Design <- createDesign(N = c(10, 20, 30))

Generate <- function(condition, fixed_objects) {
    dat <- with(condition, rnorm(N, 10, 5)) # distributed N(10, 5)
    dat
}

Analyse <- function(condition, dat, fixed_objects) {
    ret <- c(mean=mean(dat), median=median(dat)) # mean/median of sample data
    ret
}

Summarise <- function(condition, results, fixed_objects){
    colMeans(results)
}

# expand the design to create 300 rows with associated replications
rc <- 100
Design300 <- expandDesign(Design, repeat_conditions = rc)

rep_target <- 10000
replications <- rep(rep_target / rc, nrow(Design300))

# genSeeds() # do this once on the main node/home computer, and store the number!
iseed <- 1276149341

# get assigned array ID (default uses type = 'slurm')
arrayID <- getArrayID()

# run the simulation on subset based on arrayID subset information
runArraySimulation(design=Design300, replications=replications,
                   generate=Generate, analyse=Analyse,
                   summarise=Summarise, iseed=iseed, arrayID=arrayID, 
                   dirname='mysimfiles', filename='mysim')

This file is then submitted to the job scheduler via sbatch, pointing to the .slurm instructions.

sbatch simulation.slurm

Once complete you can now go get a beer, coffee, or whatever else tickles your fancy to celebrate as the hard part is over.

4 Post-evaluation: Combine the files

After some time has elapsed, and the job evaluation is now complete, you’ll have access to the complete set of simulation files store in the file names mysim-#.rds. The final step in this process is then to collect all independent results into a simulation object that resembles what would have been returned from the canonical runSimulation() function. Fortunately, this is easy to do with SimCollect(). All you must do at this point is point to the working directory containing the simulation files and use SimCollect():

library(SimDesign)

# automatically checks whether all saved files are present via SimCheck()
Final <- SimCollect('mysimfiles/')
Final
# A tibble: 3 × 8
      N    mean  median REPLICATIONS   SIM_TIME  COMPLETED               
<dbl>   <dbl>   <dbl>           <dbl>  <chr>     <chr>                   
1    10  9.9973  9.9934        10000   23.42s    Thu Apr  4 11:50:11 2024
2    20 10.007  10.015         10000   24.24s    Thu Apr  4 11:50:35 2024
3    30 10.003  10.007         10000   24.39s    Thu Apr  4 11:51:00 2024

This function detects which Design300 rows belong to the original Design object, collapse the meta-statistic results, and stored results information accordingly. No fuss, no mess. Of course, you’ll want to store this object for later use as this is the complete collection of the results from the 300 array jobs, organized into one neat little (object) package.

# save the aggregated simulation object for subsequent analyses
saveRDS(Final, "../final_sim.rds")

You should now consider moving this "final_sim.rds" off the Slurm landing node and onto your home computer via scp or your other favourite method (e.g., using WinSCP on Windows). You could also move all the saved *.rds files off your ssh landing in case there is need to inspect these files further (e.g., for debugging purposes).


5 Array jobs and multicore computing simultaneously

Of course, nothing really stops you from mixing and matching the above ideas related to multicore computing and array jobs on Slurm and other HPC clusters. For example, if you wanted to take the original design object and submit batches of these instead (e.g., submit one or more rows of the design object as an array job), where within each array multicore processing is requested, then something like the following would work:

#!/bin/bash
#SBATCH --job-name="My simulation (arrays + multiple CPUs)"
#SBATCH --mail-type=ALL
#SBATCH --mail-user=somewhere@out.there
#SBATCH --output=/dev/null    ## (optional) delete .out files
#SBATCH --time=04:00:00       ## HH:MM:SS
#SBATCH --mem-per-cpu=4G      ## Build a computing cluster with 64GB of RAM 
#SBATCH --cpus-per-task=16    ## 16 CPUs per array, likely built from 1 node
#SBATCH --array=1-9           ## 9 array jobs 

module load r
Rscript --vanilla mySimDesignScript.R

with the associated .R file containing, in this case, nine simulation conditions across the rows in Design.

library(SimDesign)

Design <- createDesign(N = c(10, 20, 30),
                       SD = c(1,2,3))

Generate <- function(condition, fixed_objects) {
    dat <- with(condition, rnorm(N, 10, sd=SD)) # distributed N(10, 5)
    dat
}

Analyse <- function(condition, dat, fixed_objects) {
    ret <- c(mean=mean(dat), median=median(dat)) # mean/median of sample data
    ret
}

Summarise <- function(condition, results, fixed_objects){
    colMeans(results)
}

Design
## # A tibble: 9 × 2
##       N    SD
##   <dbl> <dbl>
## 1    10     1
## 2    20     1
## 3    30     1
## 4    10     2
## 5    20     2
## 6    30     2
## 7    10     3
## 8    20     3
## 9    30     3

Depending on the intensity of the conditions, you may choose to distribute more than one row of the Design object to each array (multirow=TRUE in the following), otherwise the more natural choice is to distribute each row in the Design object to each assigned array.

# get array ID
arrayID <- getArrayID()

multirow <- FALSE  # submit multiple rows of Design object to array?
if(multirow){
    # If selecting multiple design rows per array, such as the first 3 rows, 
    #  then next 3 rows, and so on, something like the following would work
    
    ## For arrayID=1, rows 1 through 3 are evaluated 
    ## For arrayID=2, rows 4 through 6 are evaluated
    ## For arrayID=3, rows 7 through 9 are evaluated
    array2row <- function(arrayID) 1:3 + 3 * (arrayID-1)
} else {
    # otherwise, use one row per respective arrayID
    array2row <- function(arrayID) arrayID
}

# Make sure parallel=TRUE flag is on to use all available cores! 
runArraySimulation(design=Design, replications=10000, 
                   generate=Generate, analyse=Analyse, summarise=Summarise, 
                   iseed=iseed, dirname='mysimfiles', filename='mysim', 
                   parallel=TRUE, arrayID=arrayID, array2row=array2row)  

When complete, the function SimCollect() can again be used to put the simulation results together given the nine saved files (nine files would also saved were multirow set to TRUE and #SBATCH --array=1-3 were used instead as these are stored on a per-row basis).

This type of hybrid approach is a middle ground between submitting the complete job (top of this vignette) and the condition + replication distributed load in the previous section, though has similar overhead + inefficiency issues as before (though less so, as the array jobs are evaluated independently). Note that if the row’s take very different amounts of time to evaluate then this strategy can prove less efficient (e.g., the first two rows may take 2 hours to complete, while the third row may take 12 hours to complete), in which case a more nuanced array2row() function should be defined to help explicit balance the load on the computing cluster.

6 Extra information (FAQs)

6.1 Helpful Slurm commands

In addition to using sbatch to submit jobs, the following contains other useful Slurm commands.

sbatch <jobfile.slurm>  # submit job file to Slurm scheduler
squeue -u <username>    # what jobs are currently queued/running for a specific user
sshare -U <username>    # check the share usage for a specific user
scancel <jobid>         # cancel a specific job
scancel -u <username>   # cancel all queued and running jobs for a specific user

6.2 My HPC cluster excution time/RAM is limited and terminates before the simulation is complete

This issue is important whenever the HPC cluster has mandatory time/RAM limits for the job submissions, where the array job may not complete within the assigned resources — hence, if not properly managed, will discard any valid replication information when abruptly terminated. Unfortunately, this is a very likely occurrence, and is largely a function of being unsure about how long each simulation condition/replication will take to complete when distributed across the arrays (some conditions/replications will take longer than others, and it is difficult to be perfectly knowledgeable about this information beforehand) or how large the final objects will grow as the simulation progresses.

To avoid this time/resource waste it is strongly recommended to add a max_time and/or max_RAM argument to the control list (see help(runArraySimulation) for supported specifications), which are less than the Slurm specifications. These control flags will halt the runArraySimulation() executions early and return only the complete simulation results up to this point. However, this will only work if these arguments are non-trivially less than the allocated Slurm resources; otherwise, you’ll run the risk that the job terminates before the SimDesign functions have the chance to store the successfully completed replications. Setting these to around 90-95% of the respective #SBATCH --time= and #SBATCH --mem-per-cpu= inputs should, however, be sufficient in most cases.

# Return successful results up to the 11 hour mark, and terminate early 
#   if more than 3.5 GB of RAM are required to store the internal results
runArraySimulation(design=Design300, replications=replications,
                   generate=Generate, analyse=Analyse,
                   summarise=Summarise, iseed=iseed, arrayID=arrayID, 
                   dirname='mysimfiles', filename='mysim',
                   control=list(max_time="11:00:00", max_RAM="3.5GB"))   

Of course, if the session does time out early then this implies that the target replications will be missed on the first job submission batch. Therefore, and as is covered in the next section, a new job must be submitted to the scheduler that is mindful of the initial simulation history (particularly, the .Random.seed states).