Penalized PPML Regression with penppml

1 Introduction

penppml is an R package that enables users to fit penalized Poisson Pseudo Maximum Likelihood (PPML) regressions with high-dimensional fixed effects (HDFE). Supported penalties in the current version are ridge and lasso. The original application that motivated the development of penppml was the estimation of three-way gravity models of trade with a large number of PTA provision dummies (Breinlich, Corradi, Rocha, Ruta, Santos Silva and Zylkin, 2021).

To install and load penppml, you can use the following commands:

install.packages("penppml")
library(penppml)
devtools::load_all()

2 Data Sets

The penppml package features the trade data set, which integrates panel data on bilateral trade flows with information about specific provisions in trade agreements for 220 exporters and 270 importers. The provisions included in the package are a subset of 16 out of 305 “essential” provisions featured in the full data set. More information about the data set and the variables is included in the corresponding help file, accessible via ?trade.

Along with the trade data set, the package includes an auxiliary data frame, countries, which contains basic information about the country ISO codes included in the main data set.

This enables users to easily filter by region or subregion. For instance, if we want to restrict our analysis to countries in the Americas, we can do the following:

selected <- countries$iso[countries$region %in% c("Americas")]
trade2 <- trade[(trade$exp %in% selected) & (trade$imp %in% selected), -(5:6)] # We remove columns 5 and 
# 6 because these variables are not needed in our regressions.

We will show the capabilities of this package using the filtered trade2 data frame.

3 Unpenalized PPML estimation with HDFE

The package enables users to run unpenalized PPML regressions with HDFE, using the hdfeppml function as follows:

reg1 <- hdfeppml(data = trade2,
                 dep = "export",
                 fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")))

As we can see, the function is designed to be data-frame-friendly: the user sets a data frame of reference in the data argument and then picks the dependent, independent and fixed effect variables either by name or by column number within the provided data frame. Also, note the following points about the syntax:

Internally, the function will do the necessary transformations of the columns into vectors and matrices, as needed by the algorithm.

Alternatively, more advanced users who prefer to handle data transformations themselves can use the internal function hdfeppml_int. For more information and examples on this issue, run ?hdfeppml or ?hdfeppml_int. Note also that this applies to all of the main functions in our package: both the data-frame-friendly wrapper and the internal function are available for use.

To obtain the results associated with our PPML model:

results <- data.frame(prov = rownames(reg1$coefficients), b = reg1$coefficients, se = 0)
results$se[!is.na(reg1$coefficients)] <- reg1$se
results

If we want to specify the independent variable, we can specify indep as pointing to columns 5 to 7 with the following code.

reg1_indep <- hdfeppml(data = trade2, indep=5:7,
                 dep = "export",
                 fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")))

4 Penalized PPML estimation with HDFE

4.1 Lasso regression

The mlfitppml function is a flexible tool for computing penalized PPML regressions with HDFE. For instance, if we want to fit a PPML regression with a lasso penalty for several values of the penalty parameter (lambda) at once, we can run:

lambdas <- c(0.05, 0.025, 0.01, 0.0075, 0.005, 0.0025, 0.001, 0.00075, 0.0005, 0.00025, 0.0001, 0)

reg2 <- mlfitppml(data = trade2,
                  dep = "export",
                  fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")),
                  penalty = "lasso",
                  lambdas = lambdas)

The function returns a list that contains two sets of coefficients for each value of lambda: the penalized coefficients (in the beta_pre element) and the post-penalty or unpenalized coefficients (in the beta element; these are calculated by estimating a post-penalty regression with just the selected variables).

If the user wishes to obtain the penalized estimates for a single value of lambda, they can either use mlfitppml as described above (just setting lambdas == x, where x is a number) or use the penhdfeppml function, upon which mlfitppml is built, directly. For instance:

reg3 <- penhdfeppml(data = trade2,
                  dep = "export",
                  fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")),
                  penalty = "lasso",
                  lambda = 0.005)

For more details on penhdfeppml, run ?penhdfeppml.

4.2 Ridge regression (in development)

mlfitppml also allows user to use the ridge penalty in their PPML regressions. Simply run:

lambdas <- seq(0.0001, 0, length.out = 10) 

reg4 <- mlfitppml(data = trade2,
                  dep = "export",
                  fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")),
                  penalty = "ridge",
                  lambdas = lambdas)

Note that this feature is still in development and may contain bugs.

4.3 Penalty selection

4.3.1 Cross-validation

The mlfitppml function enables users to carry out cross-validation of their models via the xval and IDs arguments. When xval is set to TRUE, the function performs cross-validation using a user-provided vector of IDs. For instance, if we want to do k-fold cross validation with k = 20, splitting the data set by agreement (not by observation), we can do the following:

id <- unique(trade[(trade$exp %in% selected) & (trade$imp %in% selected), 5])
nfolds <- 20
unique_ids <- data.frame(id = id, fold = sample(1:nfolds, size = length(id), replace = TRUE))

cross_ids <- merge(trade[(trade$exp %in% selected) & (trade$imp %in% selected), 5, drop = FALSE], 
                   unique_ids, by = "id", all.x = TRUE)

Now we activate the cross-validation option in mlfitppml and input the ID vector:

reg5 <- mlfitppml(data = trade2,
                  dep = "export",
                  fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")),
                  penalty = "lasso",
                  lambdas = c(seq(0.5, 0.1, by = -0.1), 0.05, 0.01, 0.005, 0.001, 0.0005, 0.0001, 0),
                  xval = TRUE,
                  IDs =  cross_ids$fold)

Now the function also returns a rmse element that includes the cross-validation results (the average RMSE or root mean squared error for each value of lambda). Users can employ this tool to choose the value of the penalty parameter that minimizes the RMSE:

reg5$rmse

4.3.2 Plugin lasso

This package also enables the use of the plugin lasso method, incorporating coefficient-specific penalty weights calculated automatically by the package. The most convenient way to do this is to set method = "plugin" in mlfitppml. Note that the plugin algorithm requires a clustering variable - we are using the interaction of the exporter and importer variables in the trade data set:

reg6 <- mlfitppml(data = trade2,
                  dep = "export",
                  fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")),
                  penalty = "lasso",
                  method = "plugin",
                  cluster = c("exp", "imp"))

To display the plugin lasso results:

results <- data.frame(prov = rownames(reg6$beta), b_pre = reg6$beta_pre, b = reg6$beta, se = 0)
results$se <- reg6$ses[1,]
results

We can also set the gamma value as defined in Belloni et al. to something less strict, e.g. 0.3.

reg6_gamma <- mlfitppml(data = trade2,
                  dep = "export",
                  fixed = list(c("exp", "time"), 
                              c("imp", "time"),
                              c("exp", "imp")),
                  penalty = "lasso",
                  method = "plugin",
                  cluster = c("exp", "imp"), gamma_val=0.3)
rownames(reg6$beta)[which(reg6_gamma$beta != 0)]
results_gamma <- data.frame(prov = rownames(reg6_gamma$beta), b_pre = reg6_gamma$beta_pre, b = reg6_gamma$beta, se = 0)
results_gamma$se <- reg6_gamma$ses[1,]
results_gamma

4.3.3 Iceberg lasso (in development)

This package also allows users to implement the two-step lasso described in Breinlich et al. (2021). This method consists in, first, running a plugin lasso estimation and second, running individual lasso regressions on each of the variables selected in the first stage. The iceberg function is designed precisely with this second step in mind. It takes a vector of dependent variables and returns a lasso regression for each one of them:

iceberg_results <- iceberg(data = trade2[, -(1:4)],
                           dep = results$prov[results$b != 0],
                           selectobs = (trade2$time == "2016"))

Currently, the function returns a matrix with coefficient estimates for each of the selected provisions. Support for standard errors (including clustered) is in development as of the current version of the package.

Since PPML coefficients can’t be easily interpreted, you may find it useful to see the raw correlations between the variables in the iceberg lasso step:

provcorr <- cor(trade2[, results$prov])
(provcorr <- provcorr[, results$prov[results$b != 0]])

5 Bootstrap Lasso

To illustrate this, we select the trade data, but now not dropping id and agreement variable.

We want to cluster by agreement, that means that we draw observations with the same agreement ID. For this, we need to create a new agreement ID in the following way:

trade3 <- trade[(trade$exp %in% selected) & (trade$imp %in% selected), ] # Now, we need id and agreement variable
# Let's cluster by agreement
trade3$alt_id <- trade3$id # ID refers to agreement ID
trade3$alt_id[is.na(trade3$alt_id)] <- 0 # We set this to zero when the ID is missing, interpreting this as the country pair not being part of any agreement.

# Create pair ID
v1 <- do.call(paste, as.data.frame(t(apply(trade3[1:2], 1, sort))))
trade3$pair <-  match(v1, unique(v1))
trade3$pair <- trade3$pair + 500


# Create maximal ID from the preexisting ID-variable inside each pair
trade3 <- within(trade3, {alt_id2 = ave(alt_id,pair,FUN=max)} ) # This creates the maximum of the ID for each pair. This adjusts for the fact that some pairs might have been part of different agreements and we want to take get a unique agreement ID for each pair. 

trade3$alt_id2[trade3$alt_id2==0] <- trade3$pair[trade3$alt_id2==0]
unique(trade3$alt_id2) # This cluster variable collects pairs for pairs that are in agreement, uses the pair ID for those that are not.
# Thus, it allows errors to be clustered within agreements.
alt_id2 <- factor(trade3$alt_id2)
trade3$clus <- alt_id2 #Add the ID to the data

Next, we run Bootstrap Lasso, which means drawing agreement clusters with replacement using the ID just created. In the bootstrap() command, first hdfeppml() is run, using a dummy which is one when any provision was in place and zero otherwise to get initial values of mu. These are then used in plugin Lasso. This is repeated B times (as specified in bootreps) and the command selects those provisions selected by plugin in at least a fraction of cases. This fraction can be specified by the option boot_threshold (Default is 1 pc).

set.seed(123)
bs1 <- bootstrap(data=trade3, dep="export", cluster_id="clus", fixed=list(c("exp", "time"), c("imp", "time"), c("exp", "imp")), indep=7:22, bootreps=10, colcheck_x = TRUE, colcheck_x_fes = TRUE, boot_threshold = 0.01, post=TRUE, gamma_val=0.01, verbose=FALSE)

6 References

Breinlich, H., Corradi, V., Rocha, N., Ruta, M., Santos Silva, J.M.C. and T. Zylkin, T. (2021). “Machine Learning in International Trade Research: Evaluating the Impact of Trade Agreements”, Policy Research Working Paper; No. 9629. World Bank, Washington, DC.

Correia, S., P. Guimaraes and T. Zylkin (2020). “Fast Poisson estimation with high dimensional fixed effects”, STATA Journal, 20, 90-115.

Gaure, S (2013). “OLS with multiple high dimensional category variables”, Computational Statistics & Data Analysis, 66, 8-18.

Friedman, J., T. Hastie, and R. Tibshirani (2010). “Regularization paths for generalized linear models via coordinate descent”, Journal of Statistical Software, 33, 1-22.

Belloni, A., V. Chernozhukov, C. Hansen and D. Kozbur (2016). “Inference in high dimensional panel models with an application to gun control”, Journal of Business & Economic Statistics, 34, 590-605.